A walnut-veneer watch storage box that can be ordered in seven internal layouts — 1, 2, 3, 5, 6, 10, or 12 cushioned slots — without changing the outer shell footprint. The veneer is matched along the lid grain so closed-box stock photography reads as a single timber tile, and a fine satin lacquer keeps the wood feeling warm rather than glossy. Inside, removable cream pillows ride in a slatted cradle so end-buyers can swap pillow sizes when the watch lugs run wide. Brass-effect hinges and a magnet-latched lid finish the carcass without visible screws on the show face.

A solid-bamboo watch organizer turned and finished by hand, with each lid hand-sanded to bring the cane node grain to the surface. The bamboo is heat-treated to lock its colour at a deep honey tone so cases ordered six months apart still match on retail counters. Internal slot count is configurable to 3, 6, 10, or 12 watches without altering the outer footprint, and the cushions ship loose so the carcass can be reused as a bracelet or sunglass tray when the buyer rotates inventory.

An MDF watch storage box finished in twelve coats of piano-bake lacquer, hand-polished between every layer until the lid surface refracts ceiling lights as a single mirror plane. Inside, a moulded velvet cradle takes 1 to 12 watches depending on the order spec, and a soft-close hinge keeps the lid from slamming on the cushions when boutique customers test the lid weight. The lacquer is tintable to any RAL or Pantone match — black, oxblood and pewter being the most-ordered finishes for jewellers’ counter packs.

An oversized wooden watch organizer with thirty velveteen pillows arranged on a single tray under a glass-pane lid, sized for collector and retail-counter use. The lid glass is mounted into a chamfered timber frame with a low ferrule rather than silicone caulk, so the case can be opened, dusted and re-closed without leaving fingerprints on the pane. Pillow inserts are held in milled grooves so they index against the lid edge — every watch sits at the same height when the box is rotated to face the customer.

A retro PU leather watch storage box printed with a deep oak wood-grain pattern, sized for 6 to 10 watches depending on slot configuration. The PU exterior gives the case a shop-window weight under one kilogram while reading on shelf as polished walnut, which lets retailers run wood-aesthetic displays in venues where solid hardwood would warp. Inside, cream felt panels are heat-bonded to the carcass and a magnet flap holds the lid down through transit shock without the click of a metal latch.

A rectangular 24-slot wooden watch organizer with cream flannel lining, divided into a 4×6 grid that pairs men’s and ladies’ wristwatches in alternating rows. The case is built around a single MDF carcass, machine-cut for the dividers rather than press-fit, so cushion seats stay square after a year of opening cycles. A removable tray sits over the bottom row to protect bracelet links from the lid hinge dust during shipping. The exterior takes both a matte oil finish and a glossy lacquer at the buyer’s choice.

A 24-compartment watch display box finished with walnut-grain veneer over an MDF shell, soft flannelette pillows holding each watch and a recessed brass label plate on the lid that takes engraving without protruding above the timber face. The grain pattern is matched along the long lid axis rather than randomized, which photographs flat and clean for B2B catalog spreads. A felt cradle below the pillows hides the lid hinge mechanism so the interior reads as a single tray rather than a hardware case.

A large-capacity synthetic leather organizer that combines six watch slots, a tilted mirror lid, ring rolls and earring strips into a single tray-and-drawer carcass. The front clasp accepts a small barrel key — the lock is a soft-touch privacy device, not a security latch — and the synthetic leather wraps a stiff MDF shell so the case keeps its right angles even when carried open. Internal trays lift out for cleaning and the mirror swings on a friction hinge, holding any angle the user leaves it at instead of slowly drooping.

A small clamshell PU leather watch box that opens on a stitched spine to reveal a single removable cream pillow, sized for one wristwatch up to a 50 mm case diameter. The exterior is wrapped in saffiano-pattern PU on a thin MDF carcass so the box can travel inside a carry-on without crushing, while the magnet flap shuts firmly enough to survive an upside-down handbag. The pillow lifts straight out, exposing a flat well that doubles as storage for a single bracelet or change tray when the watch is on the wrist.

A two-tier PU leather display case with a glass-lid top tray taking 12 watches on cream cushions and a deeper drawer below for ring rolls, bangles or pendants — total capacity reaches 24 pieces when fully loaded. The glass lid is set into a black PU bezel with rounded corners, no visible silicone, and the drawer pulls forward on a felt-glide rail so it can be operated one-handed during a counter sale. A brass label badge at the lid front takes engraving for boutique placement.

A PU leatherette organizer offered in 2, 3, 4, 5 or 6 grid layouts, mixing watch cushions with ring posts, earring slots and pendant rails inside one carcass. Each grid is divided by a moulded foam wall wrapped in cream microfiber so neighboring jewelry pieces never touch metal-to-metal. Buyers can choose grid mix at order time — for example three watches plus three ring posts, or four watches plus paired earring strips. The lid is a single magnet flap that lifts cleanly without the click of a hinge spring.

A premium PU leather watch storage box with stitched edge detail along the lid front, soft cream interior cushions and a magnetic-flap lid that holds the closure flush across the full case width. The PU is wrapped onto an MDF shell with hand-folded corners — no visible seams on the show face — and the interior tray lifts out for cleaning. Lid debossing tooling is held in stock for round and rectangular brand monograms; foil stamping is the next-tier finish for boutique launches that want metallic logo lift.

A glass-top PU leather watch display organizer designed to replace the loose-watch dresser drawer with a single lined-up tray. The clear lid lets owners see the collection at a glance without lifting anything, and a lifting tab built into the front face means the lid opens by thumb pressure rather than a fiddly hinge release. Inside, paired cushions are wrapped in cream microfiber and held in a foam matrix so they cannot drift when the box is moved. Six- and ten-slot variants share the same outer carcass.

An eco-formulated PU leather watch display box with 10 cushioned slots, sized for unisex use across both men’s and ladies’ case diameters. The PU is a low-VOC formulation pressed onto a board carcass made from recycled fibreboard, and the interior linings are spun from post-consumer microfibre rather than virgin polyester. A soft rubber gasket runs around the lid edge to keep dust out during long-term display, and the cushions are removable for cleaning between buyer demonstrations.

A glass-lid PU watch storage organizer in three slot configurations — 6, 8 or 20 — sharing a single rectangular outer footprint that simplifies retail-shelf merchandising. The PU exterior wraps the carcass in a single skin, hand-folded at the corners, and the lid uses tempered glass set into a black PU frame so the contents are visible without opening. Inside, cream cushions ride in a foam grid; the 20-slot variant uses smaller cushion footprints to maintain identical lid height across the range.

A British-racing-green PU leather watch gift box that ships with full retail-launch accessories — a paper instruction card slot under the lid, a thin felt protective sleeve, a microfibre polishing cloth and a ribbon pull tab to lift the watch off its cushion. The green PU is hot-pressed onto an MDF shell, then top-coated to keep the colour from fading under shop-window halogen. Brand foil stamping registers cleanly on the matte finish and the supplied accessory pouch can be over-printed at the same press setup.

A hand-stitched crazy horse leather watch roll for 2, 3 or 4 watches, where each watch sits between elastic strap retainers and rolls up inside the leather skin for travel. The crazy horse leather develops a darker patina along high-handling edges over the first months of use, which is the hallmark of the material — boutique-grade roll cases lean into that aging rather than sealing it under acrylic. The internal lining is a heavy cream linen that absorbs minor strap moisture without staining the leather.

A glass-lid PU leather watch display box that ships in eight slot configurations — 2, 3, 4, 5, 6, 8, 10 or 12 — under a single shared outer footprint, simplifying retail-shelf merchandising for jewellers who carry multiple SKUs. The glass lid is held in a black PU bezel with rounded corners and a thumb-press latch at the lid front; opening pressure is tuned so a customer can lift the lid one-handed while a sales associate writes up the receipt.

A heavy canvas travel roll with five individual elastic-bound watch slots and a cotton tie-string closure that flattens to under three centimetres when folded between duffel layers. The canvas is waxed at the seams to keep grit out of the watch crowns during transit, and the inner faces are lined in unbleached cotton so the watch crystals never touch a synthetic surface. The roll-up format spreads watch weight evenly so a fully loaded organizer does not sag at one end the way a hard-shell tray would.

A waterproof men’s watch storage box where the cushions are held against the floor by elastic anti-drop bands, so a watch cannot fall out of its slot if the case is rotated upside down between rooms. A dense foam floor absorbs minor impacts and the lid corners are reinforced with aluminum angle plates. The case is sized for men’s watches with case diameters up to 48 mm, including divers and chronograph crowns that overrun standard organizer spacings.

A waterproof high-end watch collection case with 8 or 15 cushioned slots, a closed-cell foam gasket running the full lid perimeter and machined steel corners that protect the case if it falls onto a hard floor. The interior cushions are wrapped in anti-microbial microfibre treated for tropical and marine collector storage. The carcass is brushed-aluminum panel over MDF, which keeps weight under two kilograms even at the 15-slot spec — practical for collectors who fly between residences with the same case.

A 10 or 12-grid waterproof watch safety case built around an ABS shell with a thickened sponge floor and twin spring-loaded clip latches on the lid. The interior is divided by a dense foam matrix that grips watch cases without compressing the bracelets, and the lid foam top-presses every piece in transit so nothing rattles when the case is checked as luggage. The shell hinge is moulded as a single piece with the lid for impact-resilience rather than relying on screwed-on hardware.

A 24-slot plastic travel watch case engineered for waterproof transit, with a polypropylene shell that flexes under impact instead of cracking, a neoprene lid gasket along the seal and a single side-clip latch that holds the lid down at four points. The slot dividers are a moulded grid rather than a foam insert so the case keeps its capacity even after years of cushion wear. Designed for retail couriers and watch-fair exhibitors who move stock between booths.

A brushed-aluminum 10-slot watch storage case where the internal dividers lift straight out for cleaning, and the recessed handle is milled flush with the lid so the case stacks without snagging. The microfibre lid pad presses the watches against their cushions during transit so heavy bracelets cannot work their way out of the slots. The lid hinge is steel pin into machined aluminum knuckles, sized for daily use rather than display.

A 35-slot aluminum suitcase watch storage box with two-stage internal trays — the upper tray lifts out fully to expose the lower row, and both trays use velvet-wrapped foam dividers tuned for unisex case widths. A side-mounted leather carry handle and recessed combination lock convert the case into a salesman briefcase suitable for off-site jeweller demonstrations. The aluminum exterior is treated for dent resistance rather than appearance, with the show face left in brushed silver.

A large-capacity aluminum watch organizer in three slot configurations — 10, 12 or 18 — finished in matte black with a recessed barrel lock at the lid front and a removable cushion tray that lifts free when the lid is fully back. The aluminum panels are bonded to an internal MDF frame that holds the right angles after five-figure opening cycles, and the corners are protected by brushed-steel angle plates that double as decorative trim.

A high-grade PU leather single-watch gift box engineered as a launch carton — the proportions and lid hinge feel are tuned for the moment a customer first lifts the lid in store. The cream pillow is built around a soft-foam core that compresses gently against the watch back, and the lid frame is finished with a fine running stitch in matching thread. The PU leatherette is a thicker grade than standard packaging stock, holding its shape through repeated lifting.

A black PU leather single-watch gift box with a soft cream pillow, clamshell magnet lid and stitched edge detail running along the lid lip. The PU is wrapped onto an MDF shell with hand-folded corners — no visible seams — and the magnet flap snaps shut firmly enough to survive courier transit without bracing tape. Designed for retail launch presentation: the lid debossing area is left blank so the buyer’s logo can be added by foil stamp or hot-press without competing artwork.

A single-watch PU leather display case organizer with a soft pillow cradle, a hinge-back lid that opens flat at 180° and a thin profile that slips inside a standard hotel safe drawer. The PU exterior is black on most production runs but the dye bath accepts custom Pantone matches for boutique runs. Inside, the cushion lifts out so the well becomes a flat tray for a single bracelet or change, and the hinge holds any angle the user leaves it at.

A classic rectangular single-watch storage box in black PU leather, sized to slip into a desk drawer or bedside cabinet without dominating the surface. The pillow cradle holds the watch level with the strap fully unfolded so the bracelet does not crease during long-term storage, and the magnet lid lifts cleanly with a thumb tab. The PU wraps a rigid carcass that keeps its right angles even when the box is squeezed inside packed luggage.

A solid wooden T-bar watch and bracelet display stand with soft microfibre wrapping along the horizontal cross-bar, designed to hold up to four wristwatches or six bracelets across the bar without overlap. The vertical post is dowel-jointed into a heavy hardwood base, sized so the stand stays upright even when one end is fully loaded. Microfibre is wrapped under the bar with a hidden seam at the back so neither knots nor staples touch the watch backs.

A portable aluminum watch display suitcase in 1, 3 or 5-slot layouts, configured as a multifunctional showcase that opens flat to present the watches at a fifteen-degree counter tilt and closes into a sales-call carry case. The aluminum panels are bonded to an internal MDF frame for right-angle retention through years of opening cycles, and the lid corners take aluminum protection plates that double as decorative trim. The interior cushions wrap in cream microfibre that contrasts cleanly against the brushed-silver shell.

A stackable countertop watch display stand with adjustable foam cushions, available in 2, 4 or 6-grid layouts that nest together so a jeweller can build a window or counter cluster from identical units. The cushion height adjusts to fit anything from a slim ladies’ dress watch to an oversize chronograph, and each unit has a velvet-wrapped base that prevents counter scratches when the stand is repositioned. The 6-grid version doubles as a bracelet or bangle display when the watch slots are repurposed.

A brown leatherette retail-counter watch display stand sized for shop-window placement, presenting a single watch on a contoured cushion at a fifteen-degree tilt that catches downlight cleanly. The leatherette wraps an MDF carcass, and the velvet-wrapped base prevents the stand from drifting on glass shelves. Boutique buyers can specify a pad-printed or hot-stamped logo on the leatherette face; the surface accepts both methods at the same setup cost.