A red PU leatherette pouch built around a single zip-around shell, sized to carry one wristwatch, two looped necklace channels, four ring slots, paired earring posts and a flat bracelet pocket. The crimson exterior wipes clean with a damp cloth and the interior is lined in cream microfiber so necklace chains slide free instead of tangling at the clasp. A flat profile under five centimetres lets the pouch rest level inside carry-on luggage, and the lid surface carries no brand mark, leaving the panel free for debossed client logos or pad-printed motifs. A rounded zinc-alloy zip pull doubles as a thumb tab when the lid is opened with one hand on a hotel dresser.

A leatherette-wrapped travel case shaped like a small zip-around suitcase, available in 2, 4, 6, 8, 10 and 12 watch-cushion configurations on the same shell. The exterior is a stiff secure leatherette that holds shape under pressure, and the interior carries soft velvet pillow cushions that lift out for cleaning or for swapping in plain bracelet bars. A 360-degree zipper runs the full perimeter so the lid lays completely flat at retail counters, and a recessed handle on the long edge folds away when the case stows in a drawer. Stitched corner reinforcements in matching thread protect the cushions from luggage knocks during travel between cities and trade shows.

A flat collector chest milled from moisture-resistant MDF wood, partitioned into 30 large bays measuring 1.8 by 3.3 inches each — sized for oversized 50 mm dial pieces alongside slimmer dress watches in the same row. A 24-slot layout is also available when buyers prefer wider individual cushions for chronograph cases. The interior is finished in deep grey velvet, and each removable pillow grips its slot with a hidden velcro strip so layouts stay flat through transport. The chest sits on four felt-padded base feet to protect dresser tops, and a piano-hinged lid swings to a 95-degree stop so it parks itself open during inventory checks.

A two-tier organizer wrapped in matte black PU leather. The upper deck holds 12 watch cushions arrayed under a flat covered lid, and a pull-out drawer beneath splits into ring loops, an earring tray and three open bracelet bays. A small barrel lock on the front face accepts a key supplied paired in a velvet pouch, and a sprung tongue keeps the drawer level when the key is turned. Soft cream interior padding lines every compartment so straps and fine chains do not nick each other in transit, and reinforced corner blocks let the case tolerate an overnight bag without warping out of square at the lid parting line.

A three-tier combo case wrapped in black PU leather, sized for collectors who store wristwatches and prescription frames in the same drawer. Layer one carries 12 watch cushions under a clear glass lid framed by a brass metal buckle that snaps closed audibly. Layer two opens to six padded eyeglass slots that fit aviator and oversized acetate frames without pressure on the temples. Layer three is a flat jewelry tray split into seven sections with dedicated ring loops along the front rail. The velvet lining throughout is a warm pewter grey that does not stain transparent acetate frames after long contact during storage on a dresser top.

A two-tier watch organizer fronted by a clear tempered-glass lid framed in matching wood-tone PU, sized to store 12 wristwatches with dial diameters up to 48 millimetres on the upper deck. The lower tier is a pull-handle drawer divided into ring channels, paired earring trays and three bracelet pockets, all wrapped in deep blue velvet that contrasts the cream upper-deck pillows for fast visual sorting. A barrel lock at the lid edge engages a sprung tongue inside the carcass, and the keys are supplied stored inside the drawer’s front-left section beneath the velvet liner. Felt feet protect dressers and the lid hinges open to a 100-degree stop.

A 20-cushion display case built on an MDF carcass and wrapped in black synthetic leather, organised across two layers of 10 slots each, stacked under a single tempered-glass lid. Cushions are removable so each layer can convert into a flat jewelry tray for cufflinks, tie clips and signet rings when watch inventory drops. A small key-locked tongue secures the glass lid, and the lining throughout is short-pile black velvet for a uniform retail look. The two-layer architecture seats the lower deck on a small lift mechanism that brings layer two forward when the lid opens, giving the buyer access to all 20 watches without removing the upper layer.

A 20-slot two-layer watch case finished in walnut-toned PU leatherette, fitted with fully modular pillow cushions that snap onto a base grid via plastic clips. Buyers can run all 20 slots as watches, swap individual cushions for flat plates, or remove an entire layer of cushions to reveal a single open velvet bay sized for chunky cuff bracelets and bangles. A glass lid with a small barrel lock seals the unit, and the two layers connect via a metal hinge bar so opening the lid lifts layer two clear of layer one. The walnut tone is colour-matched across batches with an in-house Pantone reference rather than off-the-shelf wood grain prints.

A two-tier watch and jewelry case built around a solid pine frame with a visible distressed finish — knot grain, plane-tooled facets and a hand-rubbed clear lacquer rather than a synthetic stain. The top tier holds 12 removable watch pillows under a generous glass lid that gives nearly the full case footprint to display. The lower drawer is split into compartments for bracelets, rings and cufflinks lined in moss-green velvet, a colour pulled deliberately to contrast the warm pine tone. The drawer rides on small wood runners — no metal slides — keeping the rustic build language consistent. Brass-tone face hardware ties the corner brackets and drawer pull.

A 24-compartment two-layer organizer wrapped in PU leather over an MDF carcass, sized for hospitality and tabletop retail use rather than personal collection. The full glass lid rests on a rectangular rustic frame with warm-toned trim, and inside the two layers each carry 12 soft pillows finished in champagne velvet. The lower layer slides out fully on small flat tongues — not on sprung mechanisms — so housekeeping or counter staff can tilt the pillows for guests without lifting the lid above eye level. A hidden compartment behind the lower layer’s rear panel stores a maintenance cloth. The case stays square through repeated daily access at hotel concierge desks.

A counter-top display rack built from clear acrylic uprights tied to a brushed-steel base, designed for retail showcases and live-streaming booths rather than personal storage. The acrylic risers are height-adjustable through a friction collar — no tools — so the same rack stages a single hero watch tall, or a row of three matched timepieces level. Clear acrylic paddles at the top of each riser cradle the watch strap without screening the dial under spotlights. The brushed-steel base carries threaded inserts that accept secondary props (price holders, certificate stands, hashtag cards) sold separately. Multiple finish colourways are stocked: clear, smoke, rose gold and matte black.

Loose display pillows sold individually for counter staging and product photography rather than packed inside a parent organizer. Four standardised sizes are stocked — 8 by 8.5, 8 by 9, 8.5 by 24 and 9 by 21 centimetres — covering single bangles to wide collector wristwatches and chain bracelets. Each pillow is built around a resilient cotton fill that springs back after the strap is removed, sheathed in either short-pile velvet or smooth PU leather. Velvet variants come in pewter grey, ivory, navy, oxblood and forest green; PU variants in matte black, pearl white and cognac. The seam runs along the long underside edge so it stays out of frame in product photography.

A wooden watch organizer built around an integrated motorised winder stand for automatic mechanical watches, available with 1, 2, 3, 5, 6, 10 and 12 winder positions on the same fine-wood carcass. Each winder cradle rotates on a quiet brushless motor with selectable turns-per-day presets (650, 900, 1200, 1500) controlled from a side dial — important for collectors running mixed Rolex, Omega and ETA-based movements. A crystal lid replaces the glass found on static boxes, scratch-resistant for daily handling. The exterior carries a hand-rubbed antique finish that highlights the wood grain rather than concealing it. Power is supplied via a low-voltage adaptor stored inside a hidden cable channel at the rear.

A minimalist 18-slot watch organizer milled from a brushed aluminum extrusion rather than wrapped over MDF, giving a much lower weight than wood-carcass alternatives at the same capacity. The exterior carries a fine satin brush pattern and a matte clear-coat that resists fingerprints; corners are radiused rather than mitred to remove the seam line typical of leatherette boxes. Eighteen velvet-lined slots are arranged three by six under a flat brushed-aluminum lid that closes onto a cylinder lock. The lock is integrated into the lid itself — no protruding key barrel on the front face — preserving the minimalist surface. Internal velvet is short-pile dove grey for daily use without lint pickup.

A two-piece ring display stand combining a solid hardwood base with a slim removable metal hoop frame for hanging chains, watches, and bangles above the ring slots. The cushioned ring channel runs across the base in a single row, while the upper metal arch lifts pendants clear of the surface so chains do not tangle. UGI Printing & Packaging supplies the wood, metal hardware, and outer kraft carton as one set, ready for retail counters, exhibition booths, and gift-presentation use.

Flat rectangular velvet display tray with a low MDF rim and a soft pile surface that reduces glare under spotlights, making diamonds and polished metals read more vividly in window showcases and trade-fair booths. The tray ships unsegmented so the same blank can be used for rings, earring cards, or necklaces, and the rim height stays under 2 cm so it slots into glass cases without obstructing the lid. UGI Printing & Packaging offers the tray in stocked sizes plus custom-cut foam inserts on request.

Compact beige-velvet organizer box sized for a dressing table or carry-on bag, with a hinged lid and an internal tray divided into mixed compartments: a long necklace channel along one side, square ring slots in a 1×6 row, and two open wells for earrings and chains. The exterior is wrapped in the same warm beige velvet as the interior, with a small magnetic clasp at the front edge. UGI Printing & Packaging stocks the box in single units suitable for gifting and in bulk cartons for boutique resale.

Vertical pendant display made from a powder-coated metal frame fully wrapped in soft velvet, with a stepped multi-bar layout that lets one stand hold six to eight necklaces of different lengths without overlap. Each horizontal bar is angled slightly forward so pendants face the customer rather than the wall, and the weighted base prevents tipping when chains are layered. UGI Printing & Packaging supplies the stand flat-packed with the bars detachable for shipping, and reassembly requires no tools.

Sculpted hand-form display with a wooden base and a velvet-covered upper that mimics a vertical forearm and open palm, sized for bangles, tennis bracelets, beaded strings, and elastic hairbands. The slim profile lets bracelets slide on from the fingertip and settle around the wrist section, and the wooden base is heavy enough to keep the stand upright even when six bangles are loaded. UGI Printing & Packaging offers the hand in black, beige, and gray velvet, with the option to brand the wooden base by laser engraving.

Modular drawer-style velvet tray system designed to stack vertically inside a counter showcase or dressing-table drawer, with each tray dedicated to a single jewelry type: angled ring slots, earring slits for posts and hooks, a long necklace channel, or open bracelet wells. The trays share a footprint so they nest precisely without shifting, and the velvet pile is dense enough to keep small pieces from migrating when the stack is lifted. UGI Printing & Packaging supplies mix-and-match combinations and prints retailer logos on the tray rims.

Solid-wood ring tray with parallel ring slots routed directly into the timber and each slot lined with a thin strip of dark microfiber that grips bands without leaving lint. The natural wood grain is left visible on the rim and underside, giving the tray a warmer aesthetic than fully covered velvet trays, while the slot lining still offers scratch protection for soft metals. UGI Printing & Packaging supplies the tray in walnut, oak, and natural birch finishes, in single-row and double-row layouts.

Soft gray suede-finish ring viewing tray measuring 35 by 24 by 3 cm and weighing 490 grams, designed as a single-piece counter prop that a jeweler hands across the counter during a sale. The interior is segmented into a central ring row with side wells for pairs and small accessories, all wrapped in matte gray suede that flatters cool-toned metals. UGI Printing & Packaging foil-stamps custom logos directly into the suede on request as a luxury-packaging upgrade.

A two-piece presentation set combining a velvet-coated metal necklace bust holder with a matching cardboard rectangle gift box that has a sponge-lined interior and a satin butterfly bow tied across the lid. The set is sold together so retailers can both display a necklace on the bust and ship the same piece home in coordinated packaging without changing presentation aesthetic. UGI Printing & Packaging produces the bust, the box, and the bow as a single unitized SKU.

T-bar pendant display rack with a powder-coated metal core fully wrapped in plush velvet, featuring a single horizontal cross-arm sized for two to four pendants and a heavy disc base for stability on a counter or showcase shelf. The rack is taller and narrower than multi-bar stands, designed to feature one or two hero pendants at eye level rather than crowding many chains together. UGI Printing & Packaging supplies it in matte black, ivory, and burgundy velvet to match boutique color schemes.

Sculpted side-profile mannequin head cast in solid resin with a defined ear, jawline, and partial neck, made specifically to display earrings on the visible ear and a necklace looped around the neckline at the same time. The 3D portrait silhouette doubles as a styling prop that fits artistic boutiques, fashion editorials, and photo studios where a generic bust would feel too plain. UGI Printing & Packaging offers the resin in matte white, charcoal, and bronze finishes.

Countertop wooden display with a flat plinth base and an upright vertical bar topped by a row of small hooks for hanging necklaces and chains, with a separate front strip of holes for stud earrings and a wide front shelf for bracelets and bangles. The stand combines three jewelry types on one footprint without stacking, so the entire collection is visible from a single customer position. UGI Printing & Packaging supplies the wood in natural and walnut finishes with a velvet liner on the bracelet shelf.

Necklace display built around a single curved wooden silhouette resembling a stylized neck and shoulder line, finished with a velvet or PU surface along the front face where the chain rests and exposed wood along the back and sides. The curve mimics the natural drape of a worn necklace so chains hang in their intended shape rather than spreading flat. UGI Printing & Packaging produces the curve in two heights for choker-length and matinee-length pieces, with a weighted wooden base for stability.

Anatomically sculpted hand mannequin cast in resin and wrapped in soft PU leather, posed with fingers slightly curled and the wrist tilted at a natural angle, designed to display bracelets, watches, anklets, and rings on a single life-sized piece. Unlike the velvet flat hand, this version is freestanding from the wrist with no wooden base, suitable for editorial flat lays and photo-studio sets as well as boutique counters. UGI Printing & Packaging offers it in black, ivory, and tan PU leather finishes.

Soft cashmere-leather wrapped jewelry tray with deeply rounded corners and a flannel-lined interior, sized as a large catch-all rather than a slotted organizer so it suits watches, eyewear frames, rings, and pocket-accessories in one open well. The rounded corners give the tray a softer silhouette than rectangular velvet trays and the flannel interior reads warmer under boutique tungsten lighting. UGI Printing & Packaging supplies it in champagne, ash gray, and charcoal cashmere leather.

A soft cylindrical pillow display cushion covered in either velvet or PU leather, used as a horizontal forearm substitute that bracelets, bangles, anklets, and watches can be wrapped around as if worn. The pillow’s round cross-section keeps the band shape true and the stuffed core provides give for thicker cuffs, while the flat ends prevent rolling on the counter surface. UGI Printing & Packaging stocks small, medium, and large diameters to suit narrow chain bracelets through to oversized cuff watches.

Coordinated set of four trays sharing a common rim height and wood-frame construction but each fitted with a different internal layout: a ring row for the first tray, an earring slit grid for the second, a long necklace channel for the third, and a bracelet well for the fourth. Sold as a complete set so retailers can re-merchandise a full showcase shelf in one purchase rather than mixing odd trays. UGI Printing & Packaging offers velvet and PU leather interior options with a matching wooden frame.

Heart-shaped MDF shell wrapped in black velvet, with a button-cell LED hidden under the foam slot rim that switches on automatically the moment the magnetic lid lifts. The footprint measures 7.2 x 6.6 x 4.5 cm, sized to slip into a jacket pocket without bulging, and the single ring slot is angled forward so the stone catches the blue wash. UGI Printing & Packaging customizes the velvet color, LED color (cool blue, warm white, pink), and a foil-stamped monogram on the inner lid liner. MOQ 300 pcs with replaceable CR2032 cells supplied.

Heart contour milled from a single block of natural beech, sanded to 240 grit before a clear matte oil finish that lets the figured grain show through. The recessed lid panel takes laser-engraved names, initials, or wedding date up to 60 characters in any of four typefaces. Inside, a cream velvet pad sits over a foam riser with a single ring slot cut on a 15-degree angle so the stone faces the lid when opened. UGI Printing & Packaging supplies engraving artwork proofs, alternate woods (walnut, cherry, oak), and burnished brass hinge upgrades; MOQ 200 pcs.

Solid walnut body machined from a 25 mm board, with the lid and base joined by a recessed steel piano hinge running the full back edge. The magnetic catch sits flush in a milled pocket on the lid lip, holding the box closed without any visible hardware on the outside surfaces. Inside, a cream velvet pillow with two pre-cut slots holds the engagement and wedding bands side by side at matching height. UGI Printing & Packaging laser-engraves crest, monogram, or date on the lid, offers walnut, cherry, or oak stock, and applies an oil-rub or matte lacquer finish; MOQ 200 pcs.

Square wooden box assembled from kiln-dried pine planks with butt-jointed sides and an inset top, finished in a clear water-based seal that keeps the natural knot pattern visible through the surface. The lid takes a deep V-cut engraving of the couple’s first names stacked over the wedding date, in one of four typeface options chosen during proofing. A folded burlap pad inside the base cradles the rings during the ceremony so the ring bearer can carry the box flat without the rings shifting. UGI Printing & Packaging handles artwork lockup, twine wrap accessories, and rustic or stained finish variants; MOQ 200 pcs.

Rectangular bamboo-laminated MDF body with a glass-paneled lid framed in a thin brass strip, opening on a continuous brass piano hinge. The interior is divided into a velvet-lined ring strip with eight slots along the top edge, two lift-out earring trays in the middle, and a long bracelet trough running across the front. UGI Printing & Packaging customizes the lid glass into a UV-printed photo pane or frosted monogram, selects between bamboo, walnut, or oak veneers, and adds an internal mirror riser for retail counter display; MOQ 150 pcs.

Two-tier heart cut from solid walnut: the upper half pivots on a small concealed hinge with a magnetic catch in the lid lip, while the lower half conceals a finger-pull drawer that slides out on a felt-lined runner. Both compartments are lined with cream velvet, the upper pad takes one angled ring slot and the drawer holds loose earrings or a folded note. UGI Printing & Packaging laser-engraves a custom motif on the lid, swaps walnut for cherry or oak, and ships each unit in a foam cradle inside a kraft mailer; MOQ 200 pcs.

Violin silhouette die-cut from a 4 mm MDF shell, flocked in plush velvet that mimics the shape’s curves down to the tapered scroll and waist cutouts. The lid is hinged at the bouts and held closed by two small magnets at the corners, with a foam ring pad inside contoured to follow the f-hole pattern. Sized at roughly 14 x 5 x 3 cm, the box accommodates a single ring or a pair of small studs. UGI Printing & Packaging customizes velvet color, screen-printed string detail on the lid, and a satin ribbon pull stitched into the waist; MOQ 300 pcs.

Strawberry-shaped two-piece resin shell wrapped in red velvet flock, with applied gold-plated metal beads scattered across the surface to read as seeds. The leafy green calyx at the top doubles as the lid, hinging back on a hidden barrel pin and snapping closed onto a magnetic insert. Inside, a felted pad with one ring slot sits at a slight forward tilt so the band is visible the moment the lid lifts. UGI Printing & Packaging customizes the velvet shade (classic red, blush pink, ivory white), bead finish (gold, rose gold, antique brass), and add-on satin gift sleeve; MOQ 300 pcs.

Single-piece clamshell box molded from a continuous MDF shell so the lid and base read as one body, wrapped uniformly in velvet flock that hides the seam at the back hinge. Inside, a slotted foam insert holds a ring at the front, two earrings in the middle, and a pendant slot at the back; the configuration is selectable per SKU during ordering. The lid is held closed by a hidden magnet pair and opens at a fixed 95 degrees against an internal stop. UGI Printing & Packaging offers nine velvet shades, foil-stamped lid logos, and printed satin ribbon ties; MOQ 500 pcs across configurations.

Square wooden box milled from quarter-sawn ash with a clean butt-jointed corner and a sliding-lift lid that drops into a recessed rabbet. The lid takes a deep V-cut engraving of the phrase “Always and Forever” in a flowing script, scorched dark with a CO2 laser pass and finished under a satin water-based seal. Inside, a single ivory velvet pad with a centered ring slot holds either an engagement ring or a wedding band; no second slot, by design, for ring-bearer use. UGI Printing & Packaging swaps the engraved phrase for couple’s vows, names, or initials and ships each unit with a small jute pouch; MOQ 200 pcs.

Themed shaped velvet ring boxes molded from resin shells in animal (bear, cat, panda) and fruit (apple, pear, watermelon) silhouettes, each wrapped in matching colored velvet flock and detailed with applied resin features like ears, leaves, or button eyes. Lids hinge on small barrel pins concealed at the back of each form and snap shut on inset magnets; the interior carries one foam-cut ring slot finished in cream velvet. Shapes ship as a mix-and-match SKU range so wholesalers can pick any combination of silhouettes per case. UGI Printing & Packaging supplies stocked shapes plus custom shape tooling on quotation; MOQ 500 pcs (mix any 6 shapes minimum).

Hexagonal silhouette with all six sides cut at 60-degree mitres from 5 mm MDF, wrapped in plush velvet with a contrasting velvet pattern flock-printed along the lid. Two parallel ring slots run side by side through a foam insert centered along the long diagonal, holding engagement and wedding bands at identical height for ceremony display. The lid hinges along one long side and snaps closed onto a recessed magnetic catch. UGI Printing & Packaging customizes velvet shade pairing (lid pattern vs body base), foil-stamped center medallion, and printed satin ribbon ties; MOQ 300 pcs.

Rectangular two-piece lift-off paperboard box, walls built from 1200 gsm recycled greyboard with a wrap of textured matte art paper on the exterior. Interior is fitted with a black flocked foam insert featuring one front ring slot, two stud earring slots, and a long pendant slot at the rear with a chain-loop pin. The lift-off lid clears the base by 8 mm, locating onto a recessed inner rim that prevents lateral slip. UGI Printing & Packaging offers offset, foil, and emboss decoration on the lid wrap; MOQ 1,000 pcs across colors.

Compact square ring box at 5.8 x 5.8 x 4.5 cm, MDF shell wrapped in PU leather with a stitched edge bead running around the lid and base perimeters. A die-cast metal crown buckle sits at the front of the lid, latching into a steel loop on the base front — the latch action is mechanical, not magnetic. Inside, a satin pad with a centered ring slot holds an engagement ring at a slight forward tilt. Stocked in rose gold (PU), navy blue, forest green, and white. UGI Printing & Packaging matches Pantone PU colors and offers logo deboss on the lid; MOQ 500 pcs.

Complete gift presentation set pairing a stainless steel sunflower-pendant necklace with a textured paperboard gift box pre-fitted with a foam insert sized to display the pendant flat. The pendant carries cubic zirconia stones at the flower center and an “I love you to the moon and back” engraving on the reverse petal cluster, riveted to a 50 cm box chain. The box itself measures 9 x 9 x 3.5 cm with a magnetic flap closure on the front edge and a printed kraft outer sleeve. UGI Printing & Packaging customizes the engraving message, sleeve artwork, and ribbon band; MOQ 500 sets.

Hexagonal velvet ring holder with all six MDF side panels finished in solid velvet flock and a clean lid surface free of pattern decoration. Two parallel ring slots run along the long diagonal in the foam insert, sized to hold a slim wedding band beside a thicker engagement halo without crowding. The lid hinges on a concealed barrel pin at the back long side and snaps closed via two corner magnets rather than a single center catch. UGI Printing & Packaging supplies stock velvet colors plus Pantone-match runs, an optional lid medallion, and a printed kraft outer sleeve; MOQ 300 pcs.

Paperboard jewelry box die-cut to read as a stylized bowknot from above, with two trapezoidal lobes flanking a centered square body. The exterior is wrapped in textured pearlescent art paper that catches light differently across each lobe. Inside, the central body holds a flocked foam insert with a ring slot and pendant well, while the lobes are decorative rather than functional. The box opens via a hidden top flap on the central body that lifts on a paperboard hinge. UGI Printing & Packaging customizes the pearlescent art-paper shade, foil-stamped lobe centers, and ribbon-tied closure cord; MOQ 1,000 pcs.

Square jewelry display box with a black flocked exterior covering all six faces of a 1.5 mm cardboard shell; the interior carries a black satin pillow with a centered ring slot and a folded chain trough behind it. The lid lifts off completely rather than hinging, locating onto a recessed inner rim that stops at 8 mm engagement depth. The flat lid surface is unprinted by default, ready for hot-stamp foil or blind-deboss customization. Box footprint is 7 x 7 x 4 cm. UGI Printing & Packaging customizes the lid decoration, swaps black flock for nine other shades, and prints retail-sleeve outer cartons; MOQ 1,000 pcs.

A vanity-style upright that combines a dressing mirror, hanging field and tiered drawer storage in one unit, aimed at D2C jewelry brands shipping complete starter sets and hotel-amenity buyers refreshing in-room counters. The body is wrapped MDF finished in PU leather with a 24×18 cm bevelled top mirror; the top deck holds 30 rings across two staggered suede-lined rows plus six padded earring grids, and twin swing-out glass side doors expose eight vertical necklace hooks each, clearing chains up to 70 cm. Customisation covers PU exterior colour, contrast edge piping, embroidered lid badge, foil-stamped inner-tray branding and a printed mirror frame. Hardware (hinges, knobs, lock cylinders) ships in brass, gunmetal, brushed nickel or matte black; tooling fee waives from 200 units. Sized for retail counter sets, boutique-hotel guest rooms and subscription-box flagships that need a cohesive, on-brand storage piece in their starter shipment.

A briefcase-shaped jewelry case with a top carry handle, sized for travelling sales reps, jewelry-event vendors and retail customers buying gift sets in person at boutique counters. The shell is MDF wrapped in classic black PU leather with antique-gold corner protectors; the front lid features a tempered glass viewing window backed by a small interior mirror. Inside there is a removable upper tray with four square ring cushions and four open velvet pockets, a hinged-lid earring board with twelve satin-elastic loops, and a lower bay sized 26x16x4 cm for bracelets and tangle-free chain pouches. Customisation includes PU exterior colour and grain (smooth, lychee, croc), foil-stamped logo on the front face, contrast inner-velvet (cream, rose, navy or charcoal), and printed branding on the inner mirror border. Targeted at travel-friendly retail kits, anniversary gift sets in jewelry boutiques and small-batch corporate-gifting orders below 1,000 units.

A heritage-styled wooden jewelry chest with carved corner mouldings and brushed brass-effect hardware, designed for buyers selling vintage-aesthetic vanity sets to mature gifting and home-decor markets. Construction uses 12 mm solid pine panels with carved appliqué corners, finished in mahogany or walnut stain. The chest opens with a hinged top mirror lid and contains four tiers: a top compartment for rings and pendants, three pull-out drawers with red velvet flocking, and two magnetic swing-out side doors that hide eight necklace hooks each. A working brass-tone key lock seats into the front escutcheon. Customisation covers wood stain (mahogany, walnut, ebony, antique cherry), carving pattern (rose, fleur, plain bevel), velvet colour, hardware finish (brass, nickel, copper), and an option for a brass nameplate engraved with the buyer’s brand or the recipient’s initials. Suited to wedding-favour bundles, retired-luxe gift sets and traditional hotel-suite vanity refreshes.

A keepsake-styled trunk shaped to evoke an antique pirate chest, marketed by sellers of decorative storage, photography props and birthday or anniversary curio gifting. The shell is 9 mm density board faced with embossed PU leather, framed by stamped alloy edge bands and corner caps held with imitation rivets. The dome lid pivots on twin riveted hinges and seats into a three-digit combination lock; an internal velvet-lined tray (24x15x4 cm) sits over a deeper main bay sized 26x16x8 cm, suitable for rolled chains, costume pieces, tarot cards or notebooks. Customisation covers PU emboss pattern (worn map, croc, plain), alloy finish (antique brass, burnished copper, oxidised silver), interior velvet colour, internal silk lining print and a hot-stamped initial plate on the lid. Targeted at gift retailers, escape-room set-builders, photography studios staging vintage layouts and subscription boxes themed around mystery, travel or collectibles.

A lockable upright jewelry box that doubles as a watch stash, designed for couples-gift retailers and small-format hotel guest rooms that want one storage piece covering jewelry plus daily wear like sunglasses and watches. The chassis is MDF wrapped in PU leather; the top tier holds 24 ring slots in two velvet rows beside two padded earring grids, the inner-lid mirror is 18×14 cm, and four necklace-hook columns flank the body, each column carrying nine hooks for chains up to 60 cm. Five drawers descend in graduated depths, including a 5 cm deep base drawer fitted with three watch pillows and a pair of sunglass channels. A barrel cylinder lock and twin keys secure the front; hardware finish defaults to brushed gold. Customisation covers PU colour (eight stock shades), drawer count (4 or 5), embossed lid logo, contrast inner velvet and recipient initials engraved on a brass nameplate. Built for couples gift sets, anniversary kits, travel-retail counters and high-volume Q4 promotional packs.

A display-cabinet style organizer that lets owners read inventory through a front glass window, marketed at jewelry boutiques running self-display merchandising and home-vanity buyers wanting see-through storage. The frame is MDF wrapped in PU leather with a clear tempered glass front panel, fitted with a magnetic latch. Three side drawers (8 cm deep, fitted with sixteen necklace hooks each) interlock onto either side and can be repositioned without tools. Behind the glass sit five interior tiers: a 24-slot ring deck, a tilted earring board with sixteen elastic loops, two open velvet trays for bracelets, and a mirrored back wall (28×22 cm) that bounces light around the cabinet interior. Customisation covers PU exterior colour, internal velvet shade, glass tint (clear, smoked, bronze), foil-stamped logo on the front pillar, and side-drawer count (2, 3 or 4). Targeted at retail jewelry counters, beauty-influencer vanity setups and gift packaging for engaged-couple hampers.

A pocket-sized pendant gift box meant to ship as the hero packaging for a single necklace or pendant, used by D2C jewelry brands releasing limited drops and proposal-gift retailers wanting an unboxing moment. The shell is 1.6 mm rubber-coated ABS in violet matte, sized 7x9x3.2 cm; lifting the magnetic lid trips a microswitch that powers two warm-white SMD LEDs angled into the cavity. Inside, plush polyester-velvet flocking covers a centred slit cushion that grips a pendant chain at the lift point so the piece sits centred when displayed. A hidden CR2032 battery seats under the cushion behind a slide-cover. Customisation covers shell colour (eight matte and four metallic shades), foil logo on the lid, embroidered logo on the inner cushion, LED colour temperature (2700K, 4000K, 6000K) and the option of a printed message card slot under the flocking. Built for proposal kits, anniversary-pendant gifting and influencer-gifting drops where the unboxing video is the conversion driver.

A clamshell-on-base style jewelry box where the upper lid hinges open and a lift mechanism raises the necklace bar so chains do not crumple. Aimed at engagement-gift retailers and middle-tier hotel concierge gift programmes that want a clear lock-and-key safety angle. The body is MDF wrapped in soft PU leather; lifting the lid swings up the inner-lid mirror (16×12 cm) and triggers a steel kinematic hinge that lifts the rear necklace bar by 25 mm, clearing chains beneath. Six compartments cover the lower tier: a 16-slot ring strip, four padded earring pads, a watch trough sized for three watches, two open bracelet bays and an end pouch for cufflinks. The front lock uses a polished zinc-alloy bezel with twin laser-cut keys. Customisation covers PU colour, embossed grain, contrast stitching, foil logo on the lid, brass or chrome lock finish, and an embroidered initial above the inner mirror. Targets engagement gift sets, hotel VIP gifting and small-batch corporate-anniversary giveaways.

A square set-presentation box engineered for the moment a full jewelry set is unveiled, used by bridal jewelers, proposal-package retailers and luxury anniversary gift services. The 18x18x4.4 cm tray is paperboard-wrapped MDF coated in soft polyester velvet flocking; the lid is hinged on a damper pin so it swings open at a controlled rate and triggers three diffuser-shielded SMD LEDs (warm white) along the rear wall. The interior is configurable: a default ring-clip plus pendant slit plus a stud cushion fits a three-piece set, while the cushion is removable to reveal a flat tray for a necklace-and-earring suite. Power is a hidden CR2032 with a slide-cover under the cushion. Customisation covers velvet colour (eight stocks, four rush), foil logo on the lid, embossed inner-cushion logo, LED colour temperature, internal cavity layout (3-piece, 2-piece or flat) and a printed silk dust cover. Targeted at bridal-set unboxings, proposal kits and seasonal high-end gifting drops.

A heart-shaped single-ring case engineered as proposal hero packaging, supplied to engagement specialists, luxury florists and limited-run anniversary brands. The shell is injection-moulded ABS coated in pink, red, or champagne velvet flocking; the heart geometry measures 7×6.5×3.8 cm. Lifting the magnetic lid trips a microswitch that fires a single SMD LED behind a frosted lens at the rear of the cavity, washing the ring slot in soft warm light. Inside, a centred slit cushion grips the ring band and tilts at fifteen degrees to angle the stone toward the buyer’s eye line. Power runs from a CR2032 hidden under the cushion. Customisation covers velvet colour, foil logo on the lid, hot-stamped initial inside the lid, LED colour temperature and an option to tape a tiny voice-recording chip beneath the cushion. Sold to florists adding a ring-and-bouquet upsell, proposal-package retailers and influencer-gift drops where the heart silhouette is the visual hook.

A slim long-form display case sized to seat a full-length necklace flat or a stack of bracelets without coiling, used by bridal jewelry stockists and anniversary-set retailers. The shell is paper-wrapped MDF in 22.5x6x3.5 cm with polyester velvet flocking inside and out; lifting the magnetic lid trips a microswitch that fires two SMD LEDs along the back wall through a diffuser strip, casting an even wash over the chain bed. The cavity uses a removable strip cushion: in necklace mode, twin pendant clips support the centre of the chain and the slack drapes naturally around the bed; in bracelet mode, the cushion lifts out and four open pads accept stacked bracelets. Power is a CR2032 with a slide cover. Customisation covers velvet colour, foil logo on the lid, embossed lid emblem, LED colour temperature, cavity mode (chain or bracelet) and a debossed brand strip on the cushion. Targets bridal sets, anniversary chain gifts and in-store retail demonstration units.

A two-format velvet box family sold as a paired SKU so retailers can present a ring and a necklace from one branded line. Targets D2C jewelry brands launching sets and corporate-gift programmes that ship a coordinated unboxing. Format A is 8.8×8.8×4.3 cm for rings and earrings with a centred slit cushion and a single SMD LED behind a frosted lens; format B is 22x5x3 cm for necklaces and bracelets with twin pendant clips and a two-LED diffuser strip. Both shells are paperboard-wrapped MDF with velvet flocking, magnetic lid closures, microswitch trigger and CR2032 power. Customisation covers velvet colour matched across both formats, foil-stamped lid logo (single die-set across both sizes saves tooling cost), interior cushion debossing, LED colour temperature and a cobranded slip case sized to hold both boxes side by side. Built for engagement-set drops, anniversary kit shipments and influencer-PR mailers where format symmetry matters.

A minimalist single-tray jewelry box machined from a solid block of beech or walnut, sized 14x10x4 cm and finished with a food-safe oil rub that lets the grain breathe. Sells to Scandinavian-aesthetic homewares retailers and quiet-luxury jewelry brands that want packaging which doubles as a counter prop. The body is CNC-routed, then sanded to 320 grit and hand-oiled; the lid slides on a captive tongue with a 2 mm reveal so it does not lift off in transit. The cavity is one open bay 11x7x2.5 cm, suitable for a stack of rings, a coiled chain or a pair of stud cards. Buyers can specify wood species (beech, walnut, oak, cherry), exterior finish (oil, water-based matte, lacquer), laser-engraved logo on the lid, an interior microsuede liner pad and CNC-cut compartment dividers. Target use-cases include retail jewelry-counter giveaways, daily-wear vanity organizers and homewares-store cross-merchandising as a small-object catch tray.

A two-piece slide-drawer jewelry box pressed from 350 gsm uncoated kraft, sleeved into a matching kraft outer sleeve, supplied across five footprints (ring 5x5x3, stud 7x7x2.8, pendant 9x9x3, bangle 9x9x3.5, necklace 16x16x3 cm). Sells to small-business jewelry sellers on Etsy and Shopify who want a no-plastic, on-brand mailer. The black-core foam insert is hot-knife slit on demand to grip rings, hold a stud card or seat a folded chain. Customisation covers kraft weight (250 to 400 gsm), inner foam colour (black, charcoal, ivory), single-colour or two-colour offset print on the sleeve, foil-stamped logo (gold, silver, rose, copper, holographic), embossed monogram and a printed thank-you card slot under the foam. Recyclable and curbside-compostable when used unprinted. Target use-cases: small-batch e-commerce shipping inside a padded mailer, weekend market stalls and sustainable-brand subscription boxes.

A pillar-form four-tier jewelry organizer that rotates a full 360 degrees on a base bearing, intended for travelling jewelry buyers and influencer-targeted gifting where the rotating reveal is the visual hook. The shell is ABS plastic with a soft fabric lining; each of the four levels carries a different layout: ring slot ring at top, earring grid, watch and bracelet bay, and a deeper closed compartment with a removable insert. Two of the levels are hinged half-shells that swing open like petals, while the lower two are pull-out trays. The crowned lid magnet-locks the stack closed for transit. Customisation covers ABS body colour (eight stock shades plus four metallics), interior fabric colour, printed logo on the lid via pad-print or dome decal, and an option to swap the bottom closed compartment for a ring-clip cushion. Target use-cases: travel-retail kits, e-commerce subscription drops, beauty-influencer PR mailers and counter display in airport boutiques.

A statement-coloured travel jewelry organizer that pairs scarlet and royal blue PU leather panels for a contrast brand look, sold to gift retailers and boutique-hotel concierge buyers who want the box itself to read as a centrepiece. The MDF shell is wrapped in PU leather with twin contrast panels mitred at the front; the interior carries velvet compartments across two folding wings — six ring slots, two earring grids, four open bracelet pockets, two pendant pouches and a central watch trough sized for two watches. The lid mirrors at 16×12 cm and a button-clasp closure secures the wings against the body. Customisation covers PU panel colour pairing (the red-blue base or buyer-supplied Pantones), grain (smooth, lychee, croc), foil logo on the front, embroidered initial inside the lid, and an interior velvet shade. Target use-cases: travel-retail anniversary kits, hotel concierge-station displays, gift-with-purchase items at jewelry counters and small-batch corporate gifts.

A soft-shell zipped jewelry pouch sized 22x12x6 cm closed, designed to fold open into a working tray on a hotel-room desk. Sells to travel-retail brands and corporate-gift programmes that want a thin organizer which can ship inside a carry-on without bulk. The exterior is PU leather with a YKK-style #5 zip and a contrast button-strap closure; the interior uses microsuede wraps over EVA padding for shock absorption. Inside there is a fold-out four-loop earring board, six ring slots cut into a velvet bar, two zip mesh pouches for chains, a transparent PVC stud window and an open central bay sized for a folded bracelet. Customisation covers PU exterior colour, grain (smooth, lychee, saffiano), embossed lid logo, debossed initial on the strap, contrast microsuede colour and a hot-stamped fabric care tag. Target use-cases: travel-jewelry kits, anniversary gift sets, small-batch corporate giveaways and seasonal influencer-PR drops.

A stackable flocked display tray sized 24x18x4 cm, fabricated as a paper-wrapped MDF shell with deep red polyester velvet flocking and a 3 mm raised lip. Sells to retail jewelry counters and trade-show exhibitors who buy in sets of six to twelve trays. Each tray ships as one of three layout templates: a 24-ring strip, a sixteen-loop earring grid or a twelve-pocket bracelet bay; the layouts stack uniformly so retailers can build a vertical display column. A clear acrylic lid is sold separately as a dust cover. Customisation covers velvet colour (eight stocks), exterior wrap colour, foil-stamped brand strip on the front edge, hot-knife slot patterns to a buyer’s CAD, and stack-locating dimples in the corners so trays nest cleanly under the acrylic cover. Target use-cases: jewelry-counter merchandising, in-store window displays, trade-show booth visuals and small-event pop-up retail setups for boutique brands.

A compact paperboard set box that ships in four assorted colourways (sunshine yellow, scarlet, jade green, blossom pink), used by jewelry retailers stocking colour-coded gift packaging and pop-up market sellers wanting fast colour merchandising. The shell is 350 gsm paperboard with matte lamination outside and a printed colour-matched paper inside; the lid is a separate shoulder-and-base form held shut by friction. Inside, a single satin-wrapped foam pad holds a ring slit centrally and a pendant slit to one side, sized so a basic ring-and-pendant set seats together. Footprint is 9x9x3.2 cm. Customisation covers paperboard weight, lamination (matte, gloss, soft-touch), foil-stamped logo, embossed monogram, inner satin colour, hot-knife pad layout (set, single ring, single pendant or stud card) and a printed liner with brand artwork. Target use-cases: small-jewelry retail counter sales, market-stall packaging, seasonal gifting and entry-tier corporate gift sets.

A 4x4x3 cm mini gift box pressed from coated paperboard, supplied 24 per inner pack and sold to small-business jewelry sellers and craft-fair vendors who need an inexpensive on-brand box for individual rings and studs. The lid is a shoulder-and-base form held by friction; a soft cotton pillow inside cushions the piece and presents it with a slit for a ring band or two punched holes for stud posts. The card stock is 300 gsm with matte or gloss lamination. Customisation covers paperboard colour (white, kraft, black, navy, blush, sage, grey, charcoal), foil-stamped lid logo (gold, silver, rose, copper), printed inner liner with branded artwork, debossed monogram, swap of cotton pillow for a foam slit pad and an option for a printed thank-you tag tucked under the pillow. Target use-cases: handmade-jewelry shop fulfilment, craft-fair sales, in-store ring purchases and entry-tier subscription-box drops.

A two-piece white paperboard gift box with a flocked red inner liner, supplied in pack sizes of 1, 5, 10 or 20 so retailers can stock for both single-purchase walk-ins and weekend market runs. Footprint options span ring (5x5x3 cm), pendant (8x8x3 cm), bracelet (9x9x3 cm) and necklace (16x16x3 cm). The lid is a shoulder fit pressed from 350 gsm white SBS board with matte lamination; the inside carries flocked red cotton fibre laid over a 3 mm foam pad, hot-knife cut to the buyer’s choice of ring slit, pendant slit or open liner. Customisation covers footprint, pack size, lid colour (white, ivory, kraft, black), foil-stamped logo, embossed monogram, alternative liner colours (red, ivory, charcoal, blush) and a printed thank-you card slot under the foam. Target use-cases: jewelry-counter packaging, market-stall sales, e-commerce shipping inside a padded mailer and retail-display gift boxes for low-ticket pieces.

A 500-piece bag-and-box bundle pack — 250 cardboard jewelry boxes paired with 250 paper carry bags — supplied to boutique jewelry stores, craft-fair vendors and online sellers who want a coordinated brand kit in one purchase. The boxes are 300 gsm SBS with matte lamination, 8x8x3 cm shoulder-and-base form, lined with a cotton-fibre pad. The bags are 210 gsm coated paper at 16x14x6 cm with twisted paper handles and reinforced bag base. The whole bundle ships with one shared brand artwork applied across both items so the unboxing reads as a single brand experience. Customisation covers paperboard and bag colour (eight stocks each), foil-stamped logo on box lids, single or two-colour offset print on bag faces, debossed monogram, twisted-paper handle colour (six stocks) and an option to add a printed thank-you card to each box. Target use-cases: boutique fit-outs, craft-fair brand starter kits, anniversary-sale promotional packs and small-business e-commerce launches.

A foldable slide-drawer paperboard jewelry box pressed flat to save freight and assembled by the buyer, supplied 500 per order to small businesses managing seasonal launches and gift-with-purchase programmes. The sleeve and drawer are die-cut from 350 gsm paperboard, ribbon-pull tab integrated into the drawer face. The flat-pack ships at less than 25 percent of the assembled volume, then assembles in around five seconds with no glue required for re-use. Inside, a black sponge insert sized to the buyer’s footprint cradles the ring, earrings or bracelet, hot-knife cut to a supplied slit pattern. Customisation covers paperboard colour, lamination finish, single, two or four-colour offset print on the sleeve, foil-stamped logo (gold, silver, rose, copper), embossed monogram, sponge colour (black, charcoal, navy, ivory) and a printed inside-drawer thank-you message. Target use-cases: small-business e-commerce drops, seasonal jewelry releases, freight-sensitive overseas shipments and reusable gift-wrap upgrades.

A slim two-piece slide-drawer cardboard box sized 17x7x4.5 cm, sold in 10-pack inner cartons to opticians cross-selling small accessories and to boutique jewelry retailers needing a long box for chains or bangles. The sleeve and drawer are 350 gsm coated paperboard with matte lamination, stocked in black, blush pink and warm white. The black sponge insert is hot-knife cut to a buyer’s footprint and can seat a folding eyewear pair, a long chain or a stack of bangles. Customisation covers paperboard colour, lamination finish, foil-stamped logo (silver, gold, rose gold, holographic), embossed monogram on the sleeve, sponge colour and a printed inner-drawer liner with brand artwork. Target use-cases: opticians’ counter sales, boutique-jewelry chain packaging, market-stall sales and small-batch corporate-gift programmes where a slim footprint matters.

A premium sliding-drawer jewelry box pressed from 400 gsm rigid grey-board, wrapped in 157 gsm coated art paper and supplied 500 per order to brands that need shelf-presence packaging for a launch run. Footprint options span ring (6x6x3 cm), earring (8x8x3 cm), pendant (10x10x3 cm) and bracelet (16x10x3 cm). The drawer glides on a moulded shoulder; a satin-ribbon pull is recessed into the drawer face. Inside, a microsuede-wrapped foam insert holds the piece with a hot-knife slit. Customisation covers exterior wrap colour, hot foil stamping in five finishes (gold, silver, rose, black, purple), embossed or debossed monogram, UV spot gloss accents over the brand mark, satin pull-ribbon colour and an internal printed-paper deck under the foam. Target use-cases: boutique brand launches, anniversary collection drops, high-end corporate gifting and brand-presentation packaging for editor mailers.

A transparent PP plastic organizer with adjustable plug-in dividers that lets the buyer reconfigure between 10 and 12 grid layouts, used by jewelry-bead retailers and craft-supply subscription boxes that ship loose components. The shell is 1.8 mm injection-moulded PP at 19x13x4 cm with snap-shut latches at both ends; dividers slide into pre-moulded channels along the floor so each grid can be widened or narrowed. The lid is transparent so the buyer reads the contents without opening. Customisation covers shell colour (clear, smoke, tinted blue, tinted pink), pad-printed brand mark on the lid, divider count and pre-set layout, hot-stamped grid labels on the lid interior and an option to bond an EVA foam pad to the floor for shock-sensitive pieces. Target use-cases: beadwork suppliers, jewelry-makers shipping component kits, craft-fair vendor inventory boxes and subscription-box jewelry-supply drops.

A drawer-style jewelry box built from 1000 gsm uncoated kraft so the wall reads more solid than the standard 350 gsm market box, sold to small businesses that want their packaging to feel premium without leaving an uncoated, recyclable look. Footprints span ring (5x5x3 cm), pendant (8x8x3 cm) and necklace (16x16x3 cm). The drawer rides inside a kraft sleeve with a finger pull cut into the face; a 12 mm black sponge insert is hot-knife slit to the buyer’s product layout. Customisation covers kraft weight (700, 1000 or 1200 gsm), sleeve and drawer print (single, two or three-colour offset), foil-stamping (gold, silver, rose, copper), embossed monogram, sponge colour (black, charcoal, ivory) and a printed thank-you tag tucked into the recess under the sponge. Target use-cases: small-business e-commerce, weekend market stalls, anniversary boutique drops and sustainable-brand subscription boxes.

A long-form jewelry storage box sized 21×12.3×5 cm, fitted with a clear tempered-glass lid so the chain bed reads at a glance. Sells to boutique jewelry retailers building see-through counter displays and home-vanity buyers who treat their everyday chains as decor. The frame is paper-wrapped MDF in matte black with a polished gold-tone trim around the lid; the bed inside is velvet flocking laid over a 4 mm foam pad, with two pendant clips fitted to the centre line. The lid hinges on twin steel pins and lands on a felt strip that doubles as a dust seal. Customisation covers exterior wrap colour, velvet colour (eight stocks), pendant-clip count, foil-stamped logo on the front edge, mirror or printed back panel and an internal LED upgrade running off a CR2032 hidden beneath the foam. Target use-cases: boutique retail counter displays, anniversary gifting, home-vanity styling and editor-mailer flat-pack drops.