This PU leather watch roll case carries eight watches in a 24 by 8 cm cylinder that ties shut with one continuous leather cord, so a full collection travels in the same footprint as a sunglasses tube. Inside, each velvet-wrapped pillow lifts out by a ribbon tab and tapers slightly so 38–46 mm cases sit upright without the bracelet sliding off mid-flight. The perimeter is saddle-stitched at 4 mm pitch with bonded nylon thread, so the seam holds shape through repeated roll-and-unroll cycles in hotel rooms. Outer panels come in cognac tan, jet black and espresso brown — three tones that photograph cleanly on linen for catalog plates and match the leather-strap shades watch shops already carry. Hardware is kept minimal: no metal buckles to scratch caseback edges, no plastic clasps to crack in checked luggage. Built in our Guangdong workshop by UGI Printing & Packaging.

This custom PU leather travel watch roll is built in three slot counts — single, double and triple — so brands can offer the same blue colorway across gift, dual-watch and small-collection tiers without changing the outer leather grain. The shell is a heat-laminated PU on a 1.2 mm foam core; the suede-finish velvet interior is bonded inline to the foam, so the lining never wrinkles when the case is unrolled. Each cushion tapers from 50 to 44 mm to grip 38–46 mm cases firmly, and the leather tie strap wraps twice for a low silhouette that disappears into a jacket pocket. Logo work is hot-stamp deboss to roughly 0.5 mm depth on the outer flap, with three pre-matched blues (navy, royal, sky) cleared for catalog use. Inside, no metal hardware contacts the caseback or crown. Built in our Guangdong workshop by UGI Printing & Packaging.

This flannelette watch travel pouch holds up to four wristwatches inside a soft fold-over wallet that brushes the case glass without leaving microscratches. The body is brushed cotton flannel laminated to a thin nonwoven backer; an inner four-pocket panel and one larger flap pocket give each watch its own dust-tight compartment, so bracelets cannot tangle in transit. The flap closes with a hidden magnetic snap rather than Velcro, which means the closure never catches on a leather strap. Outer dimensions sit close to 19 by 13 cm — passport-sleeve size — so the pouch can ride in a jacket pocket or a small handbag pouch without bulking out the silhouette. Material colors are matte charcoal, dove gray and ink navy, all photo-friendly for catalog work. Built in our Guangdong workshop by UGI Printing & Packaging.

This EVA single watch travel case shields one wristwatch — analog or smart — inside a thermoformed EVA shell with a die-cut foam cradle that fits 40–46 mm cases and 22 mm straps without modification. The outer EVA is 1680D-laminated for a clean grain that resists scuffs from key rings and pen tips, and the perimeter zipper runs on a metal coil track with a soft tab to keep the action quiet at airport security. Inside, the cradle floor is two pieces of compression foam glued to the shell, leaving a finger relief notch so the watch can be lifted by the lug without prying at the crown. The lid carries a flat microfiber pocket for a spare strap or a SIM card. Total height stays under 5 cm, so the case slides under a laptop sleeve inside a backpack pocket without forcing the zip. Built in our Guangdong workshop by UGI Printing & Packaging.

This 5-slot EVA watch travel box pairs a thermoformed hard shell with five die-cut foam pillows, so a small collection rides intact through checked luggage without the pillow inserts shifting against each other. Outer dimensions sit at roughly 23 by 14 by 6 cm — close to a glasses case footprint — and the zipper opens the lid 180 degrees flat, so the entire row of pillows is visible at once. Each pillow tapers from 48 to 42 mm to fit 38–46 mm cases, and the foam density is firm enough to hold a steel bracelet upright without sag. The lid carries a slim mesh flap for a spare strap or microfiber cloth. Outer EVA finishes ship in matte black and graphite gray as standard, with a clean surface ready for screen-print or heat-transfer brand marks. Built in our Guangdong workshop by UGI Printing & Packaging.

This velvet snap watch travel pouch is a single-watch soft sleeve sized at roughly 9 by 9 cm closed and 18 cm opened, so it covers a 46 mm case with the crown protected by the upper flap. The outer face is brushed flannelette on a thin compression foam, and the inner face is a true short-pile velvet that contacts the crystal without microscratch risk. A capped metal snap sits 12 mm in from the edge so the steel never rests against caseback or bracelet links. Seven stock colors (red, green, blue, black, gray, pink, light blue) ship from the same pattern and the same factory die, so a private-label run can rotate colorways without re-tooling. The sleeve folds flat for postage and stacks neatly inside a watch-box drawer, doubling as soft packaging for gift channels. Built in our Guangdong workshop by UGI Printing & Packaging.

This single watch travel case carries one timepiece in a square PU leather shell sized at roughly 11 by 11 by 7 cm, small enough to ride in a jacket pocket between the airport and the hotel. Inside, a removable foam pillow wrapped in soft microfiber accepts strap widths from 18 mm to 24 mm, and the buckle naturally settles at the top so the crown never grinds against the wall. The lid closes on a single brass snap rather than a zipper, which keeps the case silent in a backpack and trims overall thickness. The interior lining is a bonded suede-feel polyester that lets the caseback and crystal slide in and out without leaving micro-scratches after dozens of trips. Square-stitched edges and a foam-cored board give the silhouette enough rigidity to survive suitcase pressure, while the three-color PU run (black, forest green, orange) covers a basic, masculine and accent option from one tooling. Built in our Guangdong workshop by UGI Printing & Packaging.

This PU leather watch travel box keeps a single 42 to 46 mm timepiece on a removable microfiber cushion inside a square 12 by 12 by 8 cm shell that stacks flat on any hotel nightstand. The cushion lifts free for cleaning and is shaped so the strap wraps fully around the foam, letting the buckle settle at the top while the crown stays clear of the side wall. The lid closes on a hidden magnet behind the front lip rather than a visible snap, which keeps the exterior PU surface unbroken and gives the box the quiet feel of a presentation case. Four small rubber feet at the underside stop the box from sliding on glass or marble surfaces and lift the leather off any wet bathroom counter. The interior microfiber is brushed in one direction so the caseback drops in without catching and the crystal lifts out without lint. Edges are square-stitched onto a foam-cored board for shape retention, and the three-tone run (saddle brown, black, stone grey) suits luxury, lifestyle and corporate gift programs. Built in our Guangdong workshop by UGI Printing & Packaging.

This watchband travel organizer rolls up six smartwatch straps in a lightweight ant-cloth pouch that ends at roughly 14 by 6 cm, about the size of a sunglasses pouch and easy to slip into a backpack water-bottle gap. Unrolled it measures roughly 30 by 14 cm and lays flat on a desk with six elastic loops in a row, sized for 38 to 49 mm Apple Watch and similar smartwatch bands, plus a flap pocket at one end for spring bars, link pins and the small tool used to swap them. The loops grip each band gently so neither leather nor fluoroelastomer picks up impressions, and bar tacks at every loop anchor stop the elastic from pulling free after months of daily use. Closure is a flat woven tie rather than buckles or zippers, so nothing scratches the watch case it travels beside. Loaded with six bands the bundle weighs about 80 grams. The two-color cloth run (charcoal and beige) reads as a unisex pair on smartwatch retail plates and tech accessory shelves. Built in our Guangdong workshop by UGI Printing & Packaging.

This cow leather single watch travel pouch wraps one 40 to 44 mm timepiece in a teardrop shell roughly 12 by 9 by 4 cm, made from 1.4 mm full-grain leather that softens with handling rather than stiffening into a box. A coil zipper traces a U-curve around three sides and pulls back fully so the pouch lays open like a clamshell on a hotel desk, exposing a single suede-lined recess where the watch head sits face-up with the strap tucked underneath. A thin foam core inside the leather panels lets the case fold against the lining of a weekender without cracking, while still keeping enough shape to protect the crystal from a passport or charging cable in the same pocket. The cognac brown finish photographs as a warm catalog tone that matches premium menswear and EDC merchandising plates, and the suede interior is brushed in one direction so the caseback slides without picking up lint. Hardware is limited to one zipper pull in matching leather, so nothing on the exterior scratches another bag. Built in our Guangdong workshop by UGI Printing & Packaging.

This PU leather watch travel case with zipper carries two timepieces in a 17 by 9 by 6 cm shell that takes less suitcase space than two single boxes placed side by side. Inside, two parallel removable cushions in identical foam blocks accept 38 to 46 mm heads with 18 to 24 mm strap widths, and a soft fabric divider sits between them so crystals never touch in transit. A coil zipper runs three sides with matched teeth and pulls back fully so the case lays open like a clamshell on a hotel nightstand. The pull is a small metal slider with a leather tab loop, which keeps the action quiet and stops the tab from flapping inside a bag. The case stands on its narrow side as well as flat, useful when nightstand space is shared with a phone and room keys. Edges are square-stitched onto a foam-cored board so the silhouette stays crisp under packing-cube pressure, and the three-color PU run (black, tan, burgundy) reads as a unisex range for luxury and lifestyle retail planograms. The interior microfiber is brushed in one direction so casebacks drop in without catching. Built in our Guangdong workshop by UGI Printing & Packaging.

This PU leather watch roll case carries three timepieces in a tied bundle that closes to roughly 22 by 9 cm and slides between folded shirts in a carry-on without forcing the lid to bulge. Unrolled the case spans roughly 38 by 22 cm with three identical foam pillows wrapped in microfiber lined up along the centerline; each pillow accepts both a 40 mm dress watch on a leather strap and a 44 mm sport watch on rubber, so the same tooling serves a mixed collection. The pillows are snap-fitted into their cavities so any one of them can be lifted out for cleaning or replacement after the inside picks up cologne or sunscreen on a long trip. The closure is a soft leather tie that knots at the side rather than the top, which keeps the bundle balanced when stood on end inside a bag and avoids hardware that could scratch the watch case beside it. The suede-feel interior is brushed in one direction so casebacks slide in without lint and crystals lift out cleanly. Even long-edge stitching at a tight pitch keeps the leather from separating after many roll cycles. The three-color PU run (black, brown, navy) covers a classic, warm and accent option from one mold for boutique watch retailers. Built in our Guangdong workshop by UGI Printing & Packaging.

This single watch travel case keeps one wristwatch protected in a square 11 by 11 by 7 cm shell that drops into a duffel pocket without bulging the bag silhouette. The PU exterior wraps a foam-cored board so the cube holds shape after months of carry-on pressure, and the lid opens on a tape hinge that locks at a ninety degree stop so the user can clasp a watch one-handed. The interior cushion lifts out on two stitched tabs to reveal a flocked lower trough sized for a folded strap, a pair of cufflinks or a single signet ring, doubling the use of the box on short trips. A hidden hook on the cushion underside pins the strap so the buckle does not press into the dial during transit, and a flat magnetic disc keeps the front face free of visible hardware. Black, brown and tan colorways are calibrated for men’s gifting plates and produced by UGI Printing & Packaging on private-label runs.

This leather single watch travel case dresses the same square cube format in a pebbled PU grain that reads as quiet luxury rather than glossy plastic. The shell measures around 11 by 11 by 7 cm and the interior cushion lifts out on stitched tabs to reveal a tray that runs deeper than a basic single-watch box, sized to hold a folded smartwatch charger plus a coiled spare strap on the same trip. The cushion accepts both leather and rubber sport bands without scuffing the grain, useful for travellers who carry a 42 mm dive watch one day and a smartwatch the next. A reinforced fabric tape stitched into the lid hinge keeps the two halves locked even after repeated full opens, and a centered embossed area on the back panel is reserved for blind hot-stamp branding on private-label or corporate-gifting runs. Produced by UGI Printing & Packaging in low-MOQ batches with optional pebble-grain colorways for boutique men’s accessories programs.

This EVA hard shell watch travel case is the rugged sibling in the line, swapping leather aesthetics for shock-resistant foam and a textured polymer body. The shell is shaped from compression-molded EVA that deflects rather than dents on a desk-height drop, with a die-cut foam cradle inside that mirrors the silhouette of a 44 mm watch and a small relief cut for the crown so the case never accidentally winds the movement during transit. A coil zipper runs the perimeter with a metal pull stamped flat against the body, keeping the case from catching on a sleeping bag liner or a stuffed jacket pocket. Water beads off the textured exterior in light rain, useful for travellers crossing a hotel courtyard or biking with a strapped bag, and a small webbing loop at the corner accepts a carabiner clip for backpack daisy chains. The case suits adventure-oriented retailers and corporate-gift programs in outdoor verticals, produced by UGI Printing & Packaging on low-MOQ private-label runs.

This watchband travel organizer holds a rotation of nylon, leather and silicone straps inside a slim 300D oxford pouch sized to share a sleeve with a laptop charger. Three internal nylon band sleeves stack flat with a small fabric tab on each so users can identify a strap by feel before unzipping fully, and a front mesh pocket coils a single USB charging cable to keep the kit travel-ready rather than item-by-item. A small elastic loop anchors the smartwatch buckle keeper so the strap does not slide free when the pouch is tossed into a laptop bag, and a webbing carry handle is bartacked at four points so it survives months of one-handed lifts without separating at the seam. The 3 cm packed thickness is a deliberate cube reference for B2B buyers planning carton sizes, and the grey, navy, olive and black oxford row pairs cleanly with men’s accessory programs. Produced by UGI Printing & Packaging on low-MOQ private-label runs with optional screen-printed branding on the front face.

This compact watch travel pouch is the soft alternative in the lineup, intentionally floppy rather than rigid so the case takes the shape of its contents and lays flat inside a coat or jacket pocket. The PU exterior wraps a single layer of flocked velvet on the inside, cradling a dress watch with its strap coiled flat without any zipper teeth or foam edges that could scuff a polished case. A drawstring closure cinches at the mouth and tucks under a small PU collar so the cord does not unravel during transit, and the seam runs hidden inside the lining for a clean exterior. The format suits travelers who already own a hard storage box at home and just need a quiet pouch for a single watch on a formal-event trip, and it stacks well against jewelry rolls in retail merchandising. Produced by UGI Printing & Packaging on low-MOQ runs with optional blind embossing on the front face for boutique gifting and hospitality amenity kits.

This PU leather single watch travel box is built around the same square cube format as the entry SKU but plates with a moodier catalog story for hospitality and lifestyle programs. The lid opens to a cushion centered in a tight-pile micro-suede tray that catches direct light without glare hot-spots, and the cushion lifts out on stitched tabs to expose a flat lower base lined in the same suede, sized for a single pair of cufflinks plus a folded handkerchief on a one-night business trip. The front closure is a flat magnetic disc that releases with a quiet click rather than a metallic ping, useful in shared sleeping spaces or a hotel corridor at dawn. Crisp square corners on the body signal foam-cored construction, holding shape over months of carry-on pressure rather than rounding off at the edges. Olive, burgundy and navy colorways read as a rich palette and are produced by UGI Printing & Packaging on low-MOQ private-label runs with optional debossed branding on the lid panel.

This dual slot watch travel case carries two watches in separate bays inside a rectangular shell that runs around 18 by 11 by 7 cm. A soft PU divider stitched between the cushions keeps each piece in its own bay so the crowns never touch in transit, and the divider lifts out on stitched tabs to reconfigure the interior as a single bay for one watch plus a folded strap on a longer trip. Each cushion lifts out separately to expose a flocked spare-piece slot underneath, sized for a spare crown, a small ring or a folded silk handkerchief. The front snap is a flat magnetic disc set behind PU and closes flush across the divider midline so the closed silhouette reads as one uninterrupted line. The case suits travelling couples, his-and-hers gifting and small-business kits where two watches rotate between trips, and it slips into the carry-on lid mesh pocket most luggage brands include for shoes. Black, caramel and navy colorways are produced by UGI Printing & Packaging on private-label runs with optional twin debossed initials on the lid panel.

This PU leather watch travel pouch is the soft, featherweight option in the lineup, intentionally floppy so the case takes the shape of its contents and lays flat in a shirt pocket without telegraphing a hard rectangle through the fabric. The PU exterior wraps a suede flap that folds twice over a single watch, padding both the dial and the case-back at the same time without a zipper or rigid foam mold. A snap closure presses shut with a quiet magnetic click rather than a metallic ping, useful in formal-event sleeping rooms or quiet hotel corridors at dawn. The suede liner is stitched to a thin foam underlay so the wrap still cushions a polished case against light pressure inside a packed bag. The pouch suits menswear-boutique merchandising and is calibrated for retail plating in a four-tone palette of black, brown, tan and navy. Produced by UGI Printing & Packaging on low-MOQ runs with optional centered blind hot-stamping on the back face for private-label gifting.

This velvet single watch travel pouch is plated first as a gift and second as a watch case, with a deep matte nap that reads warm under tungsten light. The pouch wraps a cushioned liner that holds a single dress or sport watch still without a foam mold or zipper teeth, so the pile takes the shape of the case rather than fighting it. A drawstring cord cinches at the mouth and tucks under a small velvet collar so the cord does not unravel inside a gift bag or carry-on, and the seam runs hidden on the inside for a clean exterior. The format suits seasonal campaigns — Christmas, birthday, anniversary and wedding-favor programs where the unboxing moment matters more than long-term storage. Wine, forest and ivory colorways are calibrated for seasonal catalog plating, and the small footprint slips into a coat pocket for the recipient to carry the gift home. Produced by UGI Printing & Packaging on low-MOQ runs with optional foil-printed branding on the body.

This genuine leather watch travel pouch swaps PU for top-grain leather and reads as a craft piece rather than a manufactured case. The pouch is cut and folded around a single watch plus a leather bracelet, with a handmade saddle-stitch line along the seam that separates the SKU from machine-stitched PU peers. The leather lining is soft enough to cradle both pieces without scuffing the dial, and an edge-burnished rim sealed with wax signals hand-finished leather goods rather than die-cut production. A brass press-stud closure carries a small recessed logo area and clicks shut quietly without a metallic ping in formal sleeping spaces. The grain develops a patina over months of use, a deliberate quality cue for buyers who prefer aging leather to sealed PU. The format plates as an executive-gift SKU for high-end menswear retailers, and a centered embossed area on the back face is reserved for monogram personalization on private-label runs by UGI Printing & Packaging.

This three slot PU leather watch roll carries a full rotation in stitched suede bays divided by raised walls so each watch occupies its own pocket and the case-backs never touch. Each bay carries an elastic strap retainer that tensions back to roughly 14 mm and stretches to about 22 mm, accommodating slim dress watches and dive-watch buckle keepers within the same pocket. The roll binds with a wrap-around PU strap and a small brass tongue closure that clicks shut firmly without a metallic ping in shared sleeping spaces, and the suede base stays flat on a hotel desk so the roll stands upright while the user gets ready. Stitch lines on either side of each elastic loop are double-passed so the seam stays tight after repeated insertions across hundreds of trips. Saddle tan, navy and charcoal colorways are calibrated for menswear-boutique merchandising and pair with leather wallets in catalog cross-sells. Produced by UGI Printing & Packaging on private-label runs with optional debossed branding on the strap.

This multi slot watch travel case extends the watch-roll family with a choice between three and six bays, presented as a coordinated catalog set for retailers stocking a graduated SKU range. Each bay is divided by stitched suede walls so the case-backs never touch, and the elastic strap retainers stretch around 44 mm dive watches as cleanly as they grip 36 mm dress pieces. The roll binds with a wrap-around PU strap that threads through a metal keeper buckle, holding chosen tension without slipping through under shelf pressure during airport transit. A flat suede base means the rolled bundle stands square on a boutique shelf under a directional lamp, separating the SKU from softer pouches that flop on display. The Swiss-inspired silhouette is calibrated for menswear merchandising in black, saddle and grey, and a centered embossed area on the interior label is reserved for private-label foil branding on bulk runs. Produced by UGI Printing & Packaging for collectors and watch-club gifting programs.

This PU leather watch roll case rolls three watches into a 16-by-6 cm tube that ties shut with a slim leather strap and drops into a coat pocket or a packing cube without bulk. Inside, three foam pillows wrapped in soft-touch lining hold pieces up to 44 mm without bezel-to-bezel contact; each pillow lifts out so the strap can be threaded under the case-back before the watch is laid down, which avoids pin scratches when the roll is wrapped tight. Saddle-stitched along the spine in waxed linen thread and finished in vintage tan PU, the case reads as a small leather good rather than a tech accessory, so it slips into menswear gift sets without retooling. The shape stays compact when empty because the pillows do the shaping; that is the same trait that lets the rolled tube absorb suitcase compression without crushing the watches inside. Suited to private-label gift programs and brand-aligned watch retailers. Manufactured by UGI Printing & Packaging in our Guangdong workshop.

This hard shell watch travel case carries six watches in red microfiber-lined slots that ride on a single sliding cushion rail inside a matte PU exterior. Each cushion lifts cleanly from a tongue-and-groove channel, so the layout reconfigures for six 42 mm divers, five mixed-size automatics or four oversized pilots without forcing the lid. Removable dividers slot between cushions for travelers carrying watches of unrelated diameters; with the dividers out, two larger pieces sit side by side with bezel clearance. The flat base lets the case open on a hotel desk without tipping, which matters when an inventory photo is being captured in transit. A steel hinge plate hides under the PU wrap so the lid axis stays straight after thousands of cycles, and the reinforced corner stitching keeps the lid squared against the lock. The red microfiber holds the watches under shop and hotel lighting without color cast, suiting boutique window displays as well as travel use. Built by UGI Printing & Packaging in our Guangdong workshop.

This modular watch roll organizer scales from a single watch to a full ten-piece travel set inside one hard-shell tube wrapped in matte PU and lined in deep red microfiber. Ten detachable pillows lift out of the tray individually; load one for an overnight trip, three for a daily rotation, six for a long weekend or all ten for the collector who travels with the collection. Each pillow uses an elastic-foam core that absorbs hinge shock and recovers between trips, and each pillow’s strap channel runs under a microfiber bridge so the watch strap is threaded through before the piece sits down. The molded ABS outer shell tests dense to the knuckle and holds the cylindrical profile when stacked against packing cubes in a 24-inch carry-on. Watches up to 55 mm clear the lid, while smaller dress pieces stack back-to-back on shared pillows when the buyer wants the extra capacity. An interior pocket holds spare spring bars, a strap tool and a polishing cloth. Manufactured by UGI Printing & Packaging in Guangdong.

This genuine leather watch roll uses full-grain cowhide that softens into a personal patina over months of carry, and ties shut with a matching leather strap wrapped twice around the spine. Inside, one, two or three suede-lined pillows host watches up to 46 mm; the pillow count is set at order time so the same shell ships across all three configurations without retooling. The lower-right corner accepts a heat-pressed monogram up to three characters; personalization is hand-stamped before packing so the initials sit cleanly inside the natural grain. Saddle stitched in waxed linen thread along the spine, the seam is hand-finished and outlasts the leather it secures, while the soft pigskin suede lining sits short enough not to catch on bracelet links. The case relies on the watch pillows for shape, so empty rolls store flat in inventory and ship as a finished gift on a single sheet of linen. Suited to gifting programs and boutique watch retailers. Crafted by UGI Printing & Packaging in our Guangdong leather workshop.

This vintage leather watch roll case carries six or eight watches in pull-up cowhide that dyes darker around the edges and lifts in fold lines under handling. Each pillow rides in a soft cotton-blend lined tray with an elastic strap loop that hooks the watch case from below, so the piece stays centered on its cushion in transit. The single leather tie closure knots by hand and catches a brass D-ring at the closure end; both leather and brass age into the same warm register over years of carry. The six-slot configuration spaces pillows for full-sized automatics, while the eight-slot version uses thinner pillows to host dress watches and slim automatics at the same closed diameter. The spine is saddle-stitched in waxed thread and double-knotted at each end so the structural seam holds under repeated unrolling. The unstructured drape means empty cases store flat in inventory and photograph cleanly on prop wood under warm light. Produced by UGI Printing & Packaging in our Guangdong leather atelier.

This PU leather watch carry bag rolls two or three watches into a slim 17-by-6 cm cylinder finished in matte soft-touch PU and tied shut with a single wrap strap. The interior pillows are lined in a brushed polyester nap that protects polished case-backs without catching on bracelet pins; the closure flap folds inward before the strap ties, sealing the pillows under a second PU layer that keeps dust outside. The case runs in five vintage-aligned colors — black, grey, blue, green and brown — drawn from a single supplier batch so a five-color catalog plate stays consistent across SKUs. Both the two-watch and three-watch configurations share the same outer shell, so buyers can stock either layout against the same inventory line. The rolled tube fits a jacket inside pocket or a briefcase sleeve beside a 13-inch laptop, the carry-on use the design targets. Saddle-stitched along the closure flap and finished with no buckle hardware, the silhouette reads as a small leather good rather than a tech case. Built by UGI Printing & Packaging in our Guangdong workshop.

This leather watch roll organizer rolls six dress watches into a single tube that drops vertically into a carry-on side pocket, freeing the main compartment for clothing. Each slot is a foam-cored cradle wrapped in microfiber, with a separate elastic loop that holds the buckle so the strap never drags across the dial. The roll closes with a single brass snap on the spine rather than a long zipper, which means the case can be opened and reclosed one-handed on a hotel desk. The leather shell is full-grain with edge-painted seams, and the snap reinforcement plate is set behind a thin foam layer so the closure stays flush instead of bulging. Available in saddle, espresso and black, the roll suits both gift-set retailers and corporate watch programs that need a discreet travel piece. Stitched and finished by UGI Printing & Packaging in Guangdong, China.

This watch travel case pairs a thermoformed EVA shell with a 1680D nylon outer cover, so dial glass survives the kind of luggage stacking that crushes soft pouches. Inside, five velvet-lined cradles each receive a separate compression pillow that drops over the watch head, eliminating the rotation slack that normally lets crowns scrape against neighboring lugs. The YKK reverse-coil zipper runs three sides of the shell with the teeth turned inward, so dust and light splash deflect off the spine instead of seeping into the tray. A flat fabric pull tab sits against the lid rather than dangling, which keeps the case from snagging on backpack mesh during overhead transit. Inside the lid, an elastic mesh pocket carries a spring-bar tool, a microfiber square and a few extra pins for strap swaps mid-trip. Offered in black, navy and gunmetal, the case suits watch retailers, corporate gifting programs and travel-accessory private labels. Assembled in our Guangdong workshop under UGI Printing & Packaging.

This nylon hard-shell watch case carries five timepieces in a single tray that mixes dress watches, smartwatches and fitness bands without the cradles fighting each other. Each cradle is thermoformed from EVA and faced in soft velvet, so a 38 mm dress watch and a 44 mm sport smartwatch each find a snug seat that holds the dial off the floor of the tray. The outer shell is 1680D nylon over a rigid EVA core, giving the case the silhouette of a hard pelican-style box while keeping the weight well under half a kilogram. A YKK three-sided zipper opens the lid wide for easy loading; the pull tab is flat, so the case slides between books in a backpack or rolled shirts in a carry-on without snagging. Velvet on the inside of the lid keeps the crystals from touching anything hard when the case is closed. Offered in black, charcoal and navy as standard colorways. Produced by UGI Printing & Packaging in Guangdong, China.

This full grain leather watch band roll keeps five spare straps coiled in their own channels rather than tangled inside a quart-sized travel pouch, so collectors who switch between NATO, leather and rubber can pull the right one out by feel. Each channel is wide enough for a 22 mm strap with deployant clasp; smaller straps sit comfortably without flopping because the leather panel curls back over the coil when rolled. The closure is a flat leather thong sewn into the spine that wraps once and ties — no metal, no snaps, nothing that can scratch a crystal sharing the same drawer. The leather is full-grain vegetable-tanned hide finished with hand-applied edge paint, which means the roll develops the kind of patina collectors actually want rather than the synthetic crackle of bonded leather. Sold in saddle, chestnut and black, with private-label stamping available on the outer face. Stitched in our Guangdong workshop by UGI Printing & Packaging.

This zippered leather watch case offers a choice of two, three or four cradles inside the same outer footprint, so a traveler with a tight rotation and a gifting program with a four-piece set can share the same packaging line. The shell is laminated leather over a foam-cored board, giving the case a soft hand without losing rectangular shape inside a suitcase. A coil zipper runs three sides for a wide opening, and the pull is a small leather tab that lies against the spine rather than dangling. Each cradle is a foam-cored cushion faced in microfiber, with an elastic strap that captures the buckle so the lugs do not press into the cushion wall. The lid lines in soft cream microfiber so crystals never touch leather when the case is closed. Available in black and brown standard finishes, with retail-ready gift sleeves and private-label embossing for gifting briefs. Made in Guangdong at the UGI Printing & Packaging facility.

This vintage leather watch roll travel case rolls three watches into a single hand-rubbed leather tube that fits the gift-box brief Christmas hampers and luxury gifting programs ask for every season. The compartments are padded with foam and faced in soft microfiber, so a dress watch with a leather strap and a sport watch with a steel bracelet can sit side by side without scratching each other. The closure is a single leather tie strap wrapped around the bundle and looped through a flat brass ring, giving the case the vintage travel-trunk look without dangling buckles or metal that could mark a watch crystal. The leather is finished with a hand-rubbed wax that deepens with age, so the case becomes more attractive on the recipient’s desk over the years rather than wearing thin. Sold in cognac, antique brown and oxblood, with gift-box presentation cartons available for hamper programs and retail Christmas displays. Stitched and finished by UGI Printing & Packaging in Guangdong, China.

This 5-slot watch travel case pairs a pebble-grained PU shell with five removable velvet pillows sized for 38 to 46 mm watch heads, so a dive watch, two dress pieces, and a smartwatch can all share one carry-on pocket. The full-perimeter zipper seals every edge, replacing the gap-prone snap tabs that let grit into older folios. A roughly 6 mm compressed-board shell wall absorbs desk-edge knocks, while the velvet pillows lift out for cleaning thanks to a hidden velcro tongue on each base. Stitch density runs around 6 SPI with bar-tacked corners, and the zipper sliders meet flush at the front edge with short loop pulls that keep the closed silhouette flat against laptop-bag sleeves. The blank outer face accepts a hot stamp or deboss up to 80 by 30 mm, and the closed footprint clears most cabin-bag bin checks without repacking. Built by UGI Printing & Packaging for buyers placing watches in retail-ready travel cartons.

This multi-slot watch roll organizer is offered as four length variants — 2, 3, 4, and 8 slot — built from the same PU leather shell and elasticated slot panel so retailers can run one material approval across four shelf SKUs. Each slot uses a flat elastic loop that relaxes near 22 mm and tensions to roughly 14 mm, hugging dress and dive cases without leaving strap marks. Internal divider boards keep the roll cylindrical at about a 7 cm finished diameter even when half the slots are empty, so it stays presentable on a hotel nightstand. The outer tie is a 12 mm flat strap with a hidden snap backup that doubles up the closure if the strap stretches over time. Edge piping is folded and saddle-stitched in matching tone so no white foam edge shows after months of handling, and a soft flannel inner layer keeps polished case backs scratch-free. UGI Printing & Packaging handles deboss or hot stamp on the outer flap for retail-branded runs.

This Apple Watch strap pouch keeps a rotating set of smartwatch bands flat and untangled during travel. Four 24 by 7 cm pockets are sized so a 45 mm sport band, link bracelet, milanese loop, or leather strap each lies fully extended without folding the keeper at the buckle. One pocket is faced in felt so velcro sport loops grip their own panel instead of snagging on a neighbouring leather strap. The coil zipper continues to track even when a strap tail nips into the teeth, with a short loop pull that does not press into the watch case alongside it in a backpack stash pocket. The exterior is a matte PU that absorbs handling marks and photographs without glare for retail listings, while a soft inner liner protects polished hardware. Closed footprint lands just under an Apple Watch retail box so it fits the same drawer slot at home. Available for retail-branded runs through UGI Printing & Packaging.

This 5-slot watch roll is cut from full-grain hide calibrated to about 1.2 mm temper, so the shell holds its 7 cm closed cylinder without internal stiffener. The grain keeps natural pull marks and pore detail rather than being buffed flat, meaning every unit will patina differently — useful framing for collector-channel buyers. Five elastic loops tension between roughly 38 mm and 47 mm, holding vintage divers and slimmer dress cases on the same roll without strap marks. The seam is hand saddle-stitched at about 5 SPI in waxed linen thread, so a single broken stitch will not propagate down the row. A 200 gsm brushed flannel interior shields polished case backs, and the perimeter zipper rides on cotton tape with a leather pull that does not whip against the cylinder during opening. Closed length lands near 22 cm so it slides into a weekender side pocket without crushing folded shirts. UGI Printing & Packaging produces this as a small-batch leathercraft SKU with hot-foil or deboss available on the closure flap.

This 6-slot watch roll uses a pebble-grain PU shell over end stiffener discs so the cylinder stays upright even with half the slots empty. Six flannel-faced cushions are spaced at 4 cm intervals, holding sport divers up to 44 mm without bezel-to-bezel contact across the row. The flannel nap is brushed in a single direction, which catches polish residue cleanly when the bezel back rubs against it during transit. A perimeter zipper closes all three free edges so dust never reaches the cushions, and the PU edge is hand-trimmed before stitching so the seam line stays straight where flannel meets shell. Closed dimensions land near 25 cm length by 8 cm height — slim enough to ride flat across the top of a packed carry-on instead of forcing a reshuffle. The six-cushion layout covers a collector overnight kit: work watch, weekend diver, and four backup heads or rolled spare straps. UGI Printing & Packaging offers deboss or hot foil on the outer closure flap for retail SKUs.

This 10-slot watch travel case is built on a 600D oxford outer with a PU back-coat that beads off light rain instead of wicking it into the lid foam. Inside, two rows of five velvet pillows are sized for 38 to 46 mm cases, with matched lid lining so a face-up watch sees velvet above and below rather than reflective frame. An 8 mm layer of shock foam under the lid rebounds inside a second, so a closed case dropped from desk height does not bottom out onto the dials. Double zipper sliders allow opening from either end, useful when a single watch is added mid-route without exposing the full row to dust. Ten slots suit dealer or repair-shop transport loads — typical use is five customer drop-offs paired with five returned units in one trip. The oxford weave keeps tight pick density so seam needles do not enlarge the holes after repeated stitching passes. UGI Printing & Packaging supplies this case in solid colours with woven-label or silk-screen branding on the lid panel.

This single-watch travel pouch uses a brushed flannelette outer bonded to a thin PU back-laminate, so the case holds its shape without the cardboard-stiff feel of laminated gift sleeves. A round 3 mm drawstring with a wooden bead stop cinches the mouth tight enough that the watch will not work free even after the bag is tumbled in transit. The brushed nap is finished at about 1.5 mm pile, which catches lint and polish residue rather than abrading the case finish. Single-watch capacity is intentional — the pouch stays slim enough to ride flat in a jacket inside pocket or between the pages of a leather travel folio, replacing the bulkier gift box for a one-watch overnight. The laminate is bonded only where the brushed face would otherwise collapse, keeping the hand-feel soft along the gathered top. Available across a four-colour run through UGI Printing & Packaging, with care-label or woven inner tag options for retail buyers.

This flannelette watch travel pouch is offered in four piece-dyed colours — navy, forest, slate, and black — sharing one shell pattern so retailers approve a single SKU shape across the seasonal palette. The outer is a brushed cotton-poly flannelette finished to about 1.5 mm pile, paired with a velvet inner lining glued and stitched along the base so the two layers cannot separate under repeated drawstring pulls. A bartacked grommet exit holds the 3 mm round cord, while a lacquered wooden bead toggle stops the cord without staining the flannelette during humid travel. An internal PU disc at the base lets the pouch stand upright at retail rather than slumping, useful when displayed beside heavier presentation boxes. Single-watch capacity keeps the closed footprint shorter than a passport so it fits the inside pocket that already carries one. The black variant runs at higher dye saturation to prevent the grey cast cheaper flannelettes develop. Produced in seasonal colour-blocks through UGI Printing & Packaging.

This single-watch travel pouch uses the same velvet pile on both inner and outer faces, so a watch placed crystal-up or crystal-down sees the same soft field and never touches a harder backing layer. The closure is a brass-tone four-part snap rated for a couple of thousand cycles, with a small fibreboard reinforcement disc behind each snap half that distributes the pull load and prevents the velvet from stretching around the metal cap. Closed thickness lands near 1.5 cm, slim enough to ride inside a jacket inside pocket without printing through the lining or interrupting the jacket drape. The velvet is piece-dyed deeply enough to read true under tungsten without the grey cast cheap velvets develop. The pouch is structured but not stiff — the snap-closed silhouette holds its rectangle without curling at the corners after months of pocket carry. UGI Printing & Packaging produces this as a quiet-luxury slip case alternative to the louder branded gift box, with optional inner-foil tag for retail SKUs.

This retro genuine leather travel roll pairs three watch loops with a velvet-lined sunglasses recess and an open jewelry tray, replacing two or three single-purpose pouches with one carry. The hide is a pull-up leather that lightens at the bend so the closed cylinder develops natural patina along the seam after a few weeks of carry — feature, not flaw, for collector-channel buyers. The sunglasses recess is sized to a 14 cm temple length so most aviator and wayfarer frames sit fully tucked, while the open jewelry tray accepts cufflinks, rings, or a money clip. A 14 mm leather outer tie with brass-tone keeper cinches the roll to about an 8 cm cylinder diameter, fitting the upper tray of a standard leather weekender without forcing folded shirts below to be reshuffled. The interior velvet is contrast-toned so the watch face reads cleanly when the roll is laid open on a hotel desk. UGI Printing & Packaging produces this as a small-batch leathercraft SKU with deboss available on the closure flap.

This watchband travel organizer carries a rotating smartwatch wardrobe and the small tools that come with it. Six dedicated slots are sewn at 24 by 6 cm so 22 mm sport bands, 20 mm leather straps, and milanese loops all lie flat without folding the keeper. A mesh accessory pocket on the lid holds spring bars, a strap-change pin, and one spare deployant clasp without letting them rattle against the bands. Each slot uses a midline elastic loop bartacked at both ends so the elastic does not lift off the lining after repeated stretch over thicker leather straps. Closed footprint sits close to a 6.7-inch handset so the case shares the laptop-bag sleeve a buyer already uses for their phone or e-reader. The PU exterior is matte finished so handling marks do not show in retail photography, and the inner lining is a low-lint microfibre that releases polish residue without picking up colour from coloured leathers. Produced through UGI Printing & Packaging with deboss-ready outer panel.

This PU leather travel jewelry organizer keeps a full set of rings, studs, hoops and one statement chain inside a 3 cm slim zip-around shell that fits between folded shirts in a carry-on. The interior tray combines six elastic ring slots, twelve punched earring holes and a fold-down necklace bar; the bar sits flush in a foam recess when not in use, so the case still closes flat. A U-shaped coil zipper with a soft PU pull runs three sides for a wide opening that lays the tray on a hotel desk, and a lid mirror laminated behind a clear protective film lets travelers swap earrings without hunting for the bathroom. Edges are square-stitched onto a foam-cored board so the silhouette stays crisp after months of suitcase pressure, and the four-tone PU run (taupe, blush, black, ivory) suits both private-label gift sets and direct retail. Built in our Guangdong workshop by UGI Printing & Packaging.

This compact zip jewelry pouch is sized for the traveller who only needs the essentials, measuring around 12 by 9 cm and resting fully inside one palm. The clamshell opens to a soft micro-suede tray with a four-loop ring roll on one side and a removable two-row stud card on the other; lift the card and a second tray reveals a single chain channel routed into foam so a fine necklace stops sliding under the rings. The coil zipper turns each corner cleanly and is bartacked at both stops to survive being flung between a hotel safe and a hand luggage pocket. Foam under the lid is dense enough to keep stones seated even when the pouch is squeezed against a laptop, and the outer PU is wipe-clean so spilled lotion in a beach bag does not stain the body. Suited to wedding favors, hotel amenity programs and small-batch retail kits run by UGI Printing & Packaging on a 100-unit minimum.

This suede travel jewelry box wraps a foam-cored board in a velvet-touch laminate so the exterior photographs matte and reads soft to the touch. Inside, three lanes share one plane: a removable bridge holds five rings, a hooked under-bar anchors a 50 cm necklace into a foam channel, and a flip panel exposes nine punched earring holes reinforced with a stitched ring. The lid closes with a single magnetic disc set behind the suede, so the front face shows no visible hardware. Each interior tray lifts clean for refurbishing or re-fitting with a custom velvet panel, which makes the box practical for bridesmaid gifts, hotel amenity sets and small-run retail. The case is shallow enough to lay flat on folded knitwear in a carry-on instead of taking a vertical slot, and chamfered edges are piped with matching color thread to hide the cut foam line. Available in pink, grey, navy and cream from UGI Printing & Packaging.

This book-style PU jewelry organizer disguises a full travel kit as a slim hardback, with three sewn-in pages over a foam-cored spine measuring about 1.8 cm. The first spread holds six elastic ring loops sized 14 to 22 mm next to a row of punched stud holes on a brushed micro-suede page. The second spread carries a zippered mesh pouch large enough for two coiled chains plus a small sleeve for charm pendants, and the third spread offers a 22 mm watch loop and a vertical bangle column so the organizer covers wrists as well as ears and fingers. A single magnet hidden behind the PU cover holds the front flap closed and releases with one thumb. The hardback silhouette slips between a tablet and a novel in a backpack pocket, which makes the case a quiet alternative to a roll for business trips. Custom colorways and inside-cover hot-stamping are produced by UGI Printing & Packaging in low-MOQ runs for boutique gifting.

This foldable jewelry roll organizer lays out about 60 cm of storage across four sewn-in panels and rolls down to the height of a passport with a wrap-around PU strap and a hidden press-stud. Panel one is a snap-flap ring strip with eight elastic loops sized for stacking bands, panel two zips closed over a quilted micro-suede earring pouch and a small flap for backings, panel three offers two metal hooks for chains under a snap flap so clasps stay anchored when the case is rolled, and panel four carries a 22 mm watch loop next to a slim bangle slot for travellers who layer wrist pieces. Foam under each panel holds studs and stones in place when the roll is squeezed inside a personal-item bag, and stitch thread is colour-matched to the PU body so the exterior reads clean rather than busy. The plain back panel includes a centered embossed area reserved for blind hot-stamp branding on private-label runs by UGI Printing & Packaging.

This portable travel jewelry storage box runs about 19 by 13 by 7 cm and is built for the traveller who wants a hotel-room kit without bringing a vanity. A lift-out top tray covers a ring strip and a punched stud panel, both lined in tight-pile micro-suede, while a deeper compartment underneath carries three padded slots that keep chains and bracelets from coiling against rings during transit. A short PU loop stitched into the spine works as a one-hand pull for retrieval from a hotel safe or carry-on, and the lid mirror sits behind a clear protective film so cosmetics residue wipes off without dulling the silver. The front closure is a flat magnet hidden behind the PU panel for a clean silhouette that does not snag on bag linings. Two stacked units interlock evenly, useful for retail display and bridal-set gifting in the cream-taupe-wine palette finished by UGI Printing & Packaging on private-label runs.

This PU leather jewelry travel case lands at around 16 by 11 by 6 cm and opens on a rear hinge that locks at ninety degrees so users can swap pieces with both hands free. Inside, a removable ring roll bar lifts out on two clip pins to double as a tabletop ring stand, a flip panel carries six punched earring positions with each hole reinforced by a stitched ring to take heavier hoops, and a tape-hinged necklace bar swings up to clasp a 50 cm chain before dropping back into a foam channel. A small flap pocket on the lid holds spare earring backings and a folded chain extender, the kind of detail that survives real travel rather than catalog photography. The outer PU runs in a four-tone catalog palette of blush, black, tan and ivory, calibrated to coordinate with bridal accessories without bouncing on printed cards. Custom blind embossing and color-matched lining are produced for private-label brands by UGI Printing & Packaging.

This PU leather travel jewelry case combines display utility with a packable footprint, opening to a raised internal rim that doubles as a frame when left on a hotel desk. The ring strip carries six elastic loops alongside a punched stud row sized for both posts and screw-back styles, while a tape-hinged necklace bar swings up so a 50 cm chain falls cleanly to the left rather than coiling on the rings. The closure is a flat magnetic disc hidden behind the PU panel, releasing with one thumb and keeping the body free of visible hardware. The case slides into the netted lid pocket most carry-ons include for shoes and folded shirts, which removes the need to give up an interior slot during a short trip. Trays lift cleanly for refurbishing, useful for hotel amenity programs that re-fit interiors, and the dusty-rose-taupe-slate-cream palette is calibrated for retail plating. Custom hangtags and lining colors are produced by UGI Printing & Packaging on a 100-unit minimum.

This single-layer travel jewelry box keeps the interior intentionally simple for travellers who pack fewer than ten pieces and want a slab they can slip into a tote pocket. The body sits at around 2.5 cm low profile with a flocked velvet base divided by short PU walls instead of sewn channels, which lets the user redraw the layout when packing a different mix of rings, studs and one coiled chain. The lid is bonded to a foam core so it stays flat over time rather than bowing inward, and a single perimeter stitch in matching thread keeps the silhouette quiet. The three classic colorways — pure white, classic black and fashion pink — are calibrated as a quick retail SKU mix that does not need a second swatch review. The body suits boutique gifting, wedding favor sets and day-traveller kits, all produced by UGI Printing & Packaging on small-batch private-label runs with optional blind-emboss branding on the lid face.

This eight-color travel jewelry organizer is built around a single-tier interior that prioritises fast access over deep storage, a deliberate choice for travellers who edit their kit down to one tray before packing. The ring strip carries elastic loops sized to take a layered metal stack, the earring panel reinforces each punched hole with a stitched ring so heavier hoops do not tear the suede, and a tape-hinged necklace bar swings up to clasp a 50 cm chain before dropping back into a foam channel. The lid mirror sits behind a clear protective film so foundation residue wipes off without dulling the silver, and a flat magnetic disc hidden behind the PU keeps the front face free of visible hardware. The catalog covers eight tones presented as a coordinated story rather than random colorways, calibrated for boutique gifting and bridal programs. Custom hot-stamping on the back panel and color-matched lining are produced by UGI Printing & Packaging.

This velvet double-layer travel jewelry case is finished as a bridesmaid or wedding-favor gift first, with a flat-stitched velvet exterior over a foam-cored board so the monogram patch on the lid sits square against the nap. Open the lid and a bonded mirror behind a clear PET film resists eyelash glue and foundation residue. The top tray holds six earring positions in micro-suede with each punched hole reinforced by a stitched ring to support heavier wedding earrings. Lift the tray to reveal a five-loop ring bridge over two padded chain channels, all in the same velvet so the interior reads as one piece rather than a stack of accessories. A personalization tag clips to the PU pull loop without scratching the body, and an optional single-thread chain-stitch initial can be embroidered into the lid panel in matching velvet thread. Produced by UGI Printing & Packaging on a 100-unit minimum, the case suits bridesmaid programs, custom wedding-favor batches and birthday gifting for mothers and milestone celebrations.

This portable travel jewelry display case is built to stay open at one hundred ten degrees on a hotel desk while the traveller gets ready, with a tensioned tape hinge stitched into the rear seam so the lid does not sag during long sessions. The interior carries a ring bridge with elastic loops that grip bands without leaving impression marks on softer metals, an earring panel where each punched hole is reinforced by a stitched ring to support heavier studs and short hoops, and a center hook that drops a 50 cm necklace into a foam channel along the lower edge so the chain does not coil onto the rings during transit. The body stands square on its spine when the lid is closed, useful for shelf merchandising in airport boutiques. The case slips into the netted side pocket most carry-ons include for shoes, sparing a vertical luggage slot. Camel, grey and rose colorways are calibrated for retail plating and produced by UGI Printing & Packaging on private-label runs with optional blind hot-stamping.

This travel makeup organizer with mirror keeps a full beauty kit lit on a hotel vanity by laminating a portrait mirror into the lid behind a three-stage warm-to-cool LED ring. A capacitive touch button on the lid edge cycles brightness so users can match airport bathroom light or evening dinner light, and a USB-C port on the side accepts any travel power bank for charging on long-haul flights. The interior tray uses padded hook-and-loop dividers that reconfigure around tall foundation bottles, palettes and brushes; the same dividers compress so a half-empty kit does not shift in transit. The shell is reinforced with a foam-cored wall to keep the silhouette square under suitcase pressure, and a top handle is bartack-stitched at four points for daily lifting. Sized to slip into a 22-inch carry-on yet open flat on a small desk, this case suits gifting bundles, hotel amenity sets and direct-to-consumer beauty drops. Manufactured in our Guangdong facility by UGI Printing & Packaging for private-label and retail buyers.

This professional travel makeup case carries a working artist kit through airport security, hotel ballrooms and on-set dressing rooms without losing its shape. The flat-opening shell measures about 36 by 26 by 13 cm and rides on a padded shoulder strap clipped to side D-rings, freeing both hands for luggage. Inside, a removable upper tray pulls out as a nail-toolbox layer; below it, padded hook-and-loop dividers reconfigure around foundation bottles, full-size palettes and brush rolls, while a mesh pocket on the inside lid catches cotton pads and small tools. The PU exterior is heat-laminated to be waterproof and wipe-down ready, with metal corner protectors on the four bottom edges and a stitched piping seam along the top to absorb travel knocks. An ID pocket on the back panel takes a printed luggage tag, and a top handle bartack-stitched at six points handles repeated daily lifts. Available in black, blush pink and burgundy. Produced in our Guangdong workshop by UGI Printing & Packaging.

This portable cosmetic organizer trades inner dividers for one large square cavity so a full skincare and makeup routine drops in without re-packing. The exterior is a white stain-resistant PU leather that beads up foundation, lipstick and toner spills and wipes clean with a damp cloth, keeping the bag presentable in a hotel bathroom long after the trip. A square footprint of about 22 by 22 by 13 cm stands upright on its own and slips between folded sweaters in a carry-on, while a top grab handle made from doubled PU lets the user lift it out one-handed. The lid closes with a wraparound coil zipper, and the interior is lined with smooth nylon that does not snag jewelry or metal palette edges. Stitching runs square along the seam in tonal white thread so the silhouette reads clean in lifestyle photography and gift packaging. Made in our coastal Guangdong line by UGI Printing & Packaging.

This PU leather toiletry bag wraps a single deep cavity in a softly embossed pebble-grain shell that reads as luxury without the weight of real leather. The interior is lined with smooth nylon so foundation bottles, perfume vials and skincare jars stand upright without scratching the leather panel, and four small metal feet under the base keep the case off wet hotel counters. A brass-tone coil zipper with a matching PU pull tab opens the full top, and the jaws are reinforced with a folded leather binding so the teeth never bite into fabric inside a packed handbag. The bag measures about 24 by 15 by 12 cm, sized between a clutch and a small carry pouch, and ships in a muted neutral run of bone, taupe, espresso and black PU. Edges are square-stitched onto a foam-cored board so the silhouette stays crisp after months of repacking. Built by UGI Printing & Packaging at our Guangdong factory.

This waterproof cosmetic pouch lies flat at 180 degrees on a hotel counter, exposing the entire kit instead of forcing a hand to dig through a deep cavity. A removable center divider snaps into hook-and-loop strips so the pouch reconfigures around tall toner bottles or short compact tins, and an inner mesh pocket on the lid captures hair ties, cotton rounds and flat compacts. The PU exterior is heat-sealed and waterproof, beading droplets on contact so a leaky cleanser bottle does not bleed into the rest of a packed suitcase. A reinforced top handle bartack-stitched at four points lifts the pouch out of a carry-on without straining the seam, and dual zipper sliders meet at the top center so either hand can open from the side. The colorway run sits in muted PU tones suited to private-label gift sets and styled retail catalogs. Constructed by UGI Printing & Packaging in our Guangdong workshop.

This hanging dopp kit unrolls from a buckled bundle into a four-pocket panel that hooks over a hotel shower rod or robe hook on a swiveling metal hardware. A clear top pocket holds airport-compliant liquid bottles upright so a screen check passes without unpacking; below it, three PU pockets carry razor, brushes and small skincare jars in vertical slots that drain instead of pooling water. The PU shell is heat-laminated waterproof so a wet razor or toothbrush returns to its slot without seeping into the bag, and the back panel is foam-cored to keep the kit hanging square instead of sagging mid-pocket. Rolled and buckled, the kit measures about 24 by 14 by 8 cm, sized to drop into any carry-on. The colorway run includes camel, blush pink, black, ivory and a small-batch houndstooth print panel for buyers wanting a styled retail SKU. Stitched in our Guangdong atelier by UGI Printing & Packaging.

This waterproof cosmetic pouch keeps a full toiletry kit organized inside a 24 by 16 by 9 cm shell that lies flat against folded clothes in a carry-on. The interior is built around two stacked tiers: the upper tray holds elastic loops for 100 ml bottles plus a stitched brush sleeve and an electric-toothbrush slot, while the lower tier accepts a fully removable inner pouch lined with heat-bonded TPU film so any leak stays sealed inside the smaller bag rather than soaking into the shell. The face panel is a wipe-clean PU with a sealed topcoat that takes a damp cloth without staining, and a bartacked top loop carries the loaded weight through airport handling. Square base panels keep the case standing upright on a bathroom shelf, the matched coil zipper closes quietly, and the four-tone PU run (black, navy, dusty pink, beige) photographs cleanly for catalog plates. Sewn and assembled in our Guangdong workshop by UGI Printing & Packaging.

This PU leather toiletry bag is shaped around a men’s grooming kit rather than a generic cosmetic pouch, so a safety razor, cologne bottle and shave brush each sit in a dedicated slot instead of sliding loose. The 26 by 13 by 12 cm shell is wrapped in a rolled-grain PU that holds a warm vintage tan under hotel lighting, and the brass-finish YKK zipper opens against a leather-faced gusset wide enough for two-handed access at a narrow bathroom counter. Inside, an elastic strap pins the razor flat, a center loop grips the cologne by the neck, and an angled sleeve holds the shave brush bristles-up so it dries between uses. Edges are skived and folded rather than raw-cut, so the seams stay clean after months of being stuffed into a weekender. The inner suede patch debosses cleanly for private-label hot-stamping. Cut and stitched in our Guangdong workshop by UGI Printing & Packaging.

This hanging dopp kit unrolls into four labeled panels so a full grooming kit stays sorted on a 60 cm vertical drop instead of piled into one cube. Each panel takes a different loadout: tooth tools on top, a razor and clippers on the second, skincare bottles secured in mesh pockets on the third, and a flat document pocket for medication cards on the fourth. The 360-degree powder-coated steel swivel hook clears standard hotel door hardware without scratching, and the kit clips back into a 26 by 16 by 9 cm cube with a stitched top handle for room-to-room moves. Heat-taped seams along the base block shower spray from wicking through when the kit hangs over a wet counter, while a quiet magnetic snap replaces the metal clasp on the sundries flap. The shell is a matte ripstop offered in charcoal, olive, sand and slate blue that suits both men’s and women’s catalog plates. Cut and stitched in our Guangdong workshop by UGI Printing & Packaging.

This travel makeup organizer with mirror runs a 24-bulb LED ring around the lid mirror so a user can color-match foundation under cool-to-warm daylight in a hotel room rather than under yellow bathroom bulbs. A capacitive touch sensor on the upper frame cycles three brightness levels and three color temperatures, and a recessed USB-C port on the rear shell charges the internal lithium pack in about two hours for roughly four hours of mirror use. Inside the 27 by 18 by 9 cm shell, a stitched brush sleeve holds eight tapered elastic loops, four palette slots stack daily-use compacts, and a fully removable inner pouch lifts out to expose a lower compartment for skincare and tools. The lid hinge ratchets at about seventy degrees so the mirror sits at eye level for a seated user, the foam-cored lid resists suitcase crushing, and the four PU tones photograph cleanly under retail lighting. Assembled and tested in our Guangdong workshop by UGI Printing & Packaging.

This travel makeup case carries a full beauty plus skincare kit in one 32 by 22 by 14 cm shell instead of forcing the user to split tools across two pouches. Twin coil zippers swing the case open into two tiers at the same time: an upper tray with adjustable fabric dividers for palettes and compacts, and a lower tier with six elastic loops for 100 ml bottles plus a mesh flap that pins cotton pads in place. A separate jewelry tray slides out of the middle layer on a fabric pull tab, combining ring slots, earring holes and a fold-down necklace anchor on foam-backed felt. A padded brush sleeve carries twelve tapered loops, a translucent PVC pouch lifts out for the airport liquids bin, and a zip-over mesh divider isolates toiletries from makeup so a leak never reaches the powders. A trolley sleeve on the rear rides a carry-on handle, the matte PU shell wipes clean, and the four-tone PU run photographs cleanly under retail lighting. Built in our Guangdong workshop by UGI Printing & Packaging.